This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
RE: Enable EDB7xxx interrupts
- To: "'Lewin A.R.W. Edwards'" <larwe at larwe dot com>,"'eCos discussion'" <ecos-discuss at sources dot redhat dot com>
- Subject: RE: [ECOS] Enable EDB7xxx interrupts
- From: "Trenton D. Adams" <tadams at extremeeng dot com>
- Date: Mon, 25 Jun 2001 10:46:25 -0600
- Organization: Extreme Engineering
Oops, I forgot to mention that I've set bit 5 in the INTMR1.
> -----Original Message-----
> From: Lewin A.R.W. Edwards [mailto:larwe@larwe.com]
> Sent: Monday, June 25, 2001 10:40 AM
> To: Trenton D. Adams; 'eCos discussion'
> Subject: Re: [ECOS] Enable EDB7xxx interrupts
>
>
>
> >I'm testing interrupts with the CL-PS6700 PCMCIA controller
> and I need
> >to know something about the EDB7xxx interrupts. Is there
> something I
> >have to do enable interrupts on the EDB7xxx? I'm asking
> because I can
> >get the interrupts on the CL-PS6700 to activate, but the
> corresponding
> >bits for EINT1 or EXTFIQ in INTSR1 are not activated with it.
>
> Check the interrupt mask registers.
>
>
> -- Lewin A.R.W. Edwards
> Embedded Engineer, Digi-Frame Inc.
> Work: http://www.digi-frame.com/
> Tel (914) 937-4090 9am-6:30pm M-F ET
> Personal: http://www.larwe.com/ http://www.zws.com/
>
> "Far better it is to dare mighty things, to win glorious
> triumphs, even
> though checkered by failure, than to rank with those poor spirits who
> neither enjoy much nor suffer much, because they live in the
> gray twilight
> that knows not victory nor defeat."
> (Theodore Roosevelt)
>
>