This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
eCos gdb-stub problem (on SA1100)
- To: ecos-discuss at sources dot redhat dot com
- Subject: [ECOS] eCos gdb-stub problem (on SA1100)
- From: Andreas Bürgel <ab at genologic dot de>
- Date: Mon, 18 Jun 2001 16:23:59 +0200
- Organization: GenoLogic GmbH, Dortmund
While trying to track down my application-problem I got the current
CVS-source-tree and made a new gdb-stub. Before I used a gdb-stub
compiled with two(?) month old cvs-tree and a current cvs tree for
application development.
I can connect to the stub with gdb, but download fails after some
hundred bytes. I get the .rom_vectors segment transferred, but after
transferring approx. 1220 bytes of the .text segment I get packet errors
and the transfer hangs. The hardware hangs and shows the same symptoms
as in my other posting today - my debug LED is on and stays on. At this
time of the download, only the stub code contains LED interaction (some
blinking).
I'm quite sure I didn't change very spectacular things in my
stub/startup code, so why does it work with a two month old eCos-tree
but not with the current?
Thanks for any help.
(Andy, the hardware settings of the board's RAM are very conservative
currently and proved working.)
-----------------------------------------------------
i.A. Andreas Bürgel GenoLogic GmbH
Software Engineer Joseph-von-Fraunhofer-Str. 13
D-44227 DORTMUND
Germany
ab@genologic.de phone +49 (0) 231/477349-0
fax +49 (0) 231/4761234