This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: Anybody help me ! CVS MBX860 Ethernet NOT working !!!!!!!!!!!!!!!!!
- To: "Tony Ko" <nhko at gctsemi dot com>
- Subject: Re: [ECOS] Anybody help me ! CVS MBX860 Ethernet NOT working !!!!!!!!!!!!!!!!!
- From: Jesper Skov <jskov at cambridge dot redhat dot com>
- Date: 31 May 2001 09:08:12 +0200
- Cc: <ecos-discuss at sources dot redhat dot com>
- References: <9860C773D04D834D83FD6FAD00A61E930F1FBA@gctsemi.gctsemi.com>
>>>>> "Tony" == Tony Ko <nhko@gctsemi.com> writes:
Dude, reposting your problems does not make the answer fall out of the
sky. If anyone had the answer handy, they'd probably have posted it by
now.
Tony> hi. I'm trying to port mbx860 ECOS supports Ethernet on my
Tony> custom mpc860 platform. I made Ethernet supporting ECOS imgae
Tony> by downloading TCP/IP Stack on CVS. (I downloaded MBX ECOS
Tony> Source from CVS too.) But Ethernet on ECOS does not work.
Tony> For example, I made ping_test test program runs on ECOS. And I
Tony> downloaded ping_test program on my mpc860 platform by GDB and
Tony> ran it. But "Program received signal SIGTERM, Terminated. "
Tony> message was printed on GDB window. I think It's from a kind of
Tony> TRAP interrupt. Of course ping_test program seemed not to work.
Tony> I debugged source and I knew It happens when "ioctl( )" function
Tony> processes in "init_all_network_interfaces( )" function.
Tony> But there is NOT this kind of problem with ECOS-1.3.1 source.
Tony> So what's the problem at CVS source?
You have started debugging, apparently - follow the problem to the
source. No one better suited than you for that task, given that you
are using a custom platform...
FWIW I know Gary made some changes last week to the MBX ethernet
RedBoot support - I don't recall if that was RedBoot-only changes, or
fixes to the ethernet driver proper. You'd have to check his posting
and/or the ChangeLogs.
Jesper