This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: standalone eCos & proc frequency
- To: Andrea Acquaviva <aacquaviva at deis dot unibo dot it>, "ecos-discuss at sources dot redhat dot com" <ecos-discuss at sources dot redhat dot com>
- Subject: Re: [ECOS]standalone eCos & proc frequency
- From: "Lewin A.R.W. Edwards" <larwe at larwe dot com>
- Date: Thu, 08 Mar 2001 08:26:00 -0500
Hi Andrea,
>1. In order to make a standalone eCos program that runs in flash whitout
>gdb,
> I made the following steps:
I strongly suggest you delete your eCos build tree before rebuilding. I had
similar problems, and they were eventually tracked down to un-cleaned-up
leftovers in the build directories. Just move your ecos.ecc out, rm -rf *,
move the ecos.ecc back in, and ecosconfig tree then make.
The procedure you describe is correct, so I'm pretty sure the above is your
problem.
I don't know about your other question.
=== Lewin A.R.W. Edwards (Embedded Engineer)
Work: http://www.digi-frame.com/
Personal: http://www.zws.com/ and http://www.larwe.com/
"Und setzet ihr nicht das Leben ein,
Nie wird euch das Leben gewonnen sein."