This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: [porting]<sh3 7709a>
- To: "Jeroen Buyck" <rtos_eindwerk at hotmail dot com>
- Subject: Re: [ECOS] [porting]<sh3 7709a>
- From: Jesper Skov <jskov at cambridge dot redhat dot com>
- Date: 06 Mar 2001 08:33:58 +0100
- Cc: ecos-discuss at sourceware dot cygnus dot com
- References: <F268W5k1Ed28kIN4MmX000058c1@hotmail.com>
>>>>> "Jeroen" == Jeroen Buyck <rtos_eindwerk@hotmail.com> writes:
Jeroen> hello, we're two students who have to make a thesis on
Jeroen> rtos. One aspect of our thesis is to put eCos on a on-board
Jeroen> computer (for trucks). The on-board computer consists of a sh3
Jeroen> 7709a hitachi processor and 16MB flash and 4MB RAM.
This CPU variant is supported. You'll probably need special platform
initialization code.
Jeroen> We have no experience at all and we have studied the tutorials
Jeroen> of eCos but we don't understand where to begin. Could we use
Jeroen> the stubs from the EDK7708 evalution platform ? How do we
Jeroen> adapt the HAL-layer ? How do we port the kernel ? What do we
Jeroen> need at least to build a kernel with a minimum of
Jeroen> functionality ?
See the porting guide:
http://sources.redhat.com/ecos/docs-latest/porting/
Jesper