This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: download fail over I386 target
Hi alex:
Thanks for your remind, now I could download the file to target and run
it. The problem is I make all file with floppy. So now I change my configure
as the stub template made from floppy and the defalt template made from RAM.
And now I could run and test. Thank you very much.
But I still got problem with math package while I build default
template. And when I enable the serial port I also got make error for flow1.
I just update all files from eCos's CVS, my system is window2000, I
build all tools chain from net. And the shell I used is as follow:
==========================
@/ $uname -a
CYGWIN_NT-5.0 HOME-ADON 1.1.2(0.21/3/2) 2000-06-06 22:20 i686 unknown
@/ $
==========================
So, could you hint me again????
Adon Chen
----- Original Message -----
From: "Alex Mathews" <alexma@crosstor.com>
To: "adon@walkersun" <adon@walkersun.com>
Cc: <ecos-discuss@sourceware.cygnus.com>
Sent: Friday, September 15, 2000 10:15 PM
Subject: Re: [ECOS] download fail over I386 target
> I have been able to download the hello.c example program for the i386
> target. You need to give more information about which host tool you're
> using and how you go about building eCos configuration file and eCos
> image. You need to make sure that you use the i386-elf gcc cross
> compiler. You also need a separate work tree for your floppy build and
> your ram build.
>
> I have been able to use the default pc configuration, with resolving
> some GDB stubs dependencies. I have never had a problem with the math
> library. I am using ecosconfig on Red Hat linux.
>
> -Alex
>
> > "adon@walkersun" wrote:
> >
> > Hi all,
> >
> > Does anyone could download application/test into I386 target??? I
> > have build the default without MATH package, because it generated fail
> > message while build, and it work while I make a floppy and boot the
> > target. But each time I download application(hello.c)/tests the target
> > will hang, sometime it will send ok message all the time, sometime
> > will reboot or hang. I think I did something wrong but I do not know
> > where is.
> >
> > My host is Win2000, does the eCos must run over NT??? Or anyont
> > could tell me how to setup????
> >
> > Adon Chen
>
> --
> Alex Mathews
> CrosStor Software, Inc.
> 908-226-0100 ext 148
> alexma@crosstor.com
>
>
>