This is the mail archive of the
ecos-discuss@sourceware.cygnus.com
mailing list for the eCos project.
Re: How to test the serial connection with HyperTerminal in NECVRC4373
>
> The GNUPro toolchain that comes with the board is not capable of
supporting
> eCos I'm afraid. A number of modifications and fixes were made to the
tools
> since the tools given to NEC were developed. Sorry if that isn't what you
> wanted to hear :-/. In particular, the port of eCos to the vrc4373 uses
> 32-bit integer registers, not the full 64-bit.
>
> You can still build your own tools as described on the eCos web site; or
> something can be arranged if you wished to purchase the eCos Developer's
> Kit - although I think you investigated that option already?
>
:(( Sorry to hear that the toolchain can not support eCos. According to my
understanding, it is due to the porting of eCos for vrc4373 using 32-bit
register instead of full 64-bit register. Is that the all the differences?
How much the eCos Developer Kit cost? I am judging the option now. :)
Anyway, in the mean time I will go ahead to build the tool on the eCos
website.
Thanks for your reply!
Best Regards,
-Ling