This is the mail archive of the
ecos-discuss@sourceware.cygnus.com
mailing list for the eCos project.
Re: Building the arm-elf development tools on windows
- To: Pragya Gupta <pragya_g at hotmail dot com>
- Subject: Re: [ECOS] Building the arm-elf development tools on windows
- From: Jonathan Larmour <jlarmour at redhat dot co dot uk>
- Date: Tue, 02 May 2000 16:51:47 +0100
- CC: ecos-discuss at sourceware dot cygnus dot com
- Organization: Red Hat UK Ltd.
- References: <20000502101828.18843.qmail@hotmail.com>
Pragya Gupta wrote:
>
> Hi!!
> I am trying to build the arm-elf development tools on windows
> ( over eCos1.3.1) . For configuring the binary utilities , I give the
> command as follows :
> /i/src/binutils/binutils2./configure --target=arm-elf \
> --prefix=/i/tools \
> --exec-prefix=/i/tools/H-i686-pc-cygwin \
> -v 2>&1 | tee configure.out
> ( I am using 'i' drive)
>
> This comes out giving the following error :
>
> BFD does not support target arm-unknown-elf.
> *** Look in bfd/config.bfd for supported targets.
> Configure in /i/tmp/build/binutils/opcodes failed, exiting.
>
> Why is it happening ?
Is your build directory also on /i ? And is it mounted in text mode or
binary mode? ( Type `mount' to see )
Jifl
--
Red Hat, 35 Cambridge Place, Cambridge, UK. CB2 1NS Tel: +44 (1223) 728762
"Plan to be spontaneous tomorrow." || These opinions are all my own fault