This is the mail archive of the
ecos-discuss@sourceware.cygnus.com
mailing list for the eCos project.
Problem using Insight on ARM7 PID for debugging a ecos application
- To: <ecos-discuss at sourceware dot cygnus dot com>
- Subject: [ECOS] Problem using Insight on ARM7 PID for debugging a ecos application
- From: "Dipanjan Ghosh" <dghosh at sasi dot com>
- Date: Sun, 13 Feb 2000 16:04:18 +0530
- Cc: <dghosh at sasi dot com>
- Reply-To: "Dipanjan Ghosh" <dghosh at sasi dot com>
Hi
I trying to use Insight for debugging a ecos application
on ARM7 PID board. After i type the follwing line
GDB > target rdi com1
It displays the following text and goes and hangs there.
_____________________________________________
Angel Debug Monitor V.1.04 (Advanced Risc machine SDT 2.11a) for PID
Built with Serial(X11), Parallel, DCC
Rebuilt on April 1 1998 at , 00:38:47
Serial Rate: 9600
_________________________________________________
The same borad works with normal GDB without a GUI. The host
platform is i586-Cygwin
Any help/Suggestion ?
thanks
Dipanjan Ghosh
Silicon Automations Systems
Banglore, India