This is the mail archive of the
ecos-bugs@sourceware.org
mailing list for the eCos project.
[Bug 1001561] New: Internal flash driver for Freescale TWR-K60N512board
- From: bugzilla-daemon at bugs dot ecos dot sourceware dot org
- To: unassigned at bugs dot ecos dot sourceware dot org
- Date: Thu, 12 Apr 2012 15:39:07 +0100
- Subject: [Bug 1001561] New: Internal flash driver for Freescale TWR-K60N512board
- Auto-submitted: auto-generated
Please do not reply to this email. Use the web interface provided at:
http://bugs.ecos.sourceware.org/show_bug.cgi?id=1001561
Summary: Internal flash driver for Freescale TWR-K60N512 board
Product: eCos
Version: CVS
Platform: Other (please specify)
OS/Version: Cortex-M
Status: UNCONFIRMED
Severity: enhancement
Priority: low
Component: Patches and contributions
AssignedTo: unassigned@bugs.ecos.sourceware.org
ReportedBy: nau@csm-instruments.com
CC: ecos-patches@ecos.sourceware.org
Class: Advice Request
Created an attachment (id=1697)
--> (http://bugs.ecos.sourceware.org/attachment.cgi?id=1697)
Ecos patch for twr-k60n512 flash driver
Here is what I have done so far with my work on the freescale TWR_K60N512 flash
driver.
I thought it would be a good idea to share it even if it is not completely
finished :
I have been successfully able to launch the "flash1" test given by ecos on some
flash blocks but not on the entire flash : I have some errors if I run the
flash test between 0x00040000 - ~0x00045000 and near 0x0000000.
When I compile redboot with Flash support, I have a strange error if I check
either "keep redboot configuration data in flash" or "redboot flash image
system support" in the redboot configuration. Otherwise, redboot give me a
working prompt.
I will keep working on it but any help or ideas for possible solutions are, of
course, very welcome.
--
Configure bugmail: http://bugs.ecos.sourceware.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.