This is the mail archive of the ecos-bugs@sourceware.org mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

[Bug 1001450] Kinetis HAL and driver upgrade


Please do not reply to this email. Use the web interface provided at:
http://bugs.ecos.sourceware.org/show_bug.cgi?id=1001450

--- Comment #30 from Ilija Kocho <ilijak@siva.com.mk> 2012-02-12 17:34:51 GMT ---
(In reply to comment #29)
> Ilija, what are you testing the new drivers with? E.g., I can't find any
> references to TWR-FXM module on the Freescale site.

Freescale doesn't have a suitable memory card for K60 so we have built
ourselves. I am going to put information at our web site and at Towergeeks, so
here is a brief information:
    - 16MiB PSRAM with synchronous, bursting multiplexed bus (glue-less
coupling with FlexBus).
    - SST25 SPI flash
    - Micro SD socket.

TWR-K60N512 has on-board SD/MMC socket, intended for SDH but unfortunately it
is not possible to use it directly with SPI bus because MISO and MOSI seem to
be swapped!? If you play with hardware you could make some adapter. I plan to
make one by using 2 MicroSD adapters and few wires and as soon as it works I'll
post.

Ilija

-- 
Configure bugmail: http://bugs.ecos.sourceware.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]