This is the mail archive of the cygwin mailing list for the Cygwin project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

RE: ssh problem on Windows XP


Where did You get the old version from? I didn't find any older versions
on the cygwin site. It should be a site, that kept a snapshot of the old
releases as complete as possible.

Am Freitag, den 21.01.2005, 06:51 -0800 schrieb Waiss, Garrett:
> Good luck. I gave up and "downgraded" to cygwin 1.5.10-3. If you are
> running any release after that on XP SP2, there is a piping issue that
> has not been addressed.
> 
> -----Original Message-----
> From: cygwin-owner@cygwin.com [mailto:cygwin-owner@cygwin.com] On Behalf
> Of Neven Luetic
> Sent: Friday, January 21, 2005 2:48 AM
> To: cygwin@cygwin.com
> Subject: ssh problem on Windows XP
> 
> 
> Hello,
> 
> I know, problems have been reported concerning the use of ssh on windows
> xp ("ssh hangs"). I would just like to confirm, if this is, what I'm
> dealing with. And perhaps somebody knows some workaround until there is
> a fix.
> 
> I have a cygwin installation on XP at my customers and on W2K at home.
> My aim was to make some shellscripts I wrote available to some of the
> windows users via a php-interface for administrative tasks on their
> linux internet servers. 
> 
> I am using ssh with public keys to connect to the linux-servers.
> What works:
> I can ssh from my linux box to the linux servers.
> I can call "system(ssh remote-user@remote-server command)" from php on
> linux.
> I can do all this on my W2K box (Vmware), when I start the apache
> service as the same user, that has the public key.
> However on the XP computers, I can only use ssh from the command line,
> calling some script containing ssh via PHP hangs.
> 
> This is the client's errorlog (-vvv):
> 
> OpenSSH_3.9p1, OpenSSL 0.9.7e 25 Oct 2004
> debug2: ssh_connect: needpriv 0
> debug1: Connecting to xxx.xxx.xxx [xxx.xxx.xxx.xxx] port 22.
> debug1: Connection established.
> debug1: identity file /home/xxx/.ssh/identity type -1
> debug1: identity file /home/xxx/.ssh/id_rsa type -1
> debug3: Not a RSA1 key file /home/xxx/.ssh/id_dsa.
> debug2: key_type_from_name: unknown key type '-----BEGIN'
> debug3: key_read: missing keytype
> debug3: key_read: missing whitespace
> debug3: key_read: missing whitespace
> debug3: key_read: missing whitespace
> debug3: key_read: missing whitespace
> debug3: key_read: missing whitespace
> debug3: key_read: missing whitespace
> debug3: key_read: missing whitespace
> debug3: key_read: missing whitespace
> debug3: key_read: missing whitespace
> debug3: key_read: missing whitespace
> debug2: key_type_from_name: unknown key type '-----END'
> debug3: key_read: missing keytype
> debug1: identity file /home/xxx/.ssh/id_dsa type 2
> debug1: Remote protocol version 2.0, remote software version
> OpenSSH_3.4p1
> debug1: match: OpenSSH_3.4p1 pat OpenSSH*
> debug1: Enabling compatibility mode for protocol 2.0
> debug1: Local version string SSH-2.0-OpenSSH_3.9p1
> debug2: fd 3 setting O_NONBLOCK
> debug1: SSH2_MSG_KEXINIT sent
> debug1: SSH2_MSG_KEXINIT received
> debug2: kex_parse_kexinit:
> diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-he
> llman-group1-sha1
> debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
> debug2: kex_parse_kexinit:
> aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-c
> bc,rijndael-cbc@lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
> debug2: kex_parse_kexinit:
> aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-c
> bc,rijndael-cbc@lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
> debug2: kex_parse_kexinit:
> hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-9
> 6,hmac-md5-96
> debug2: kex_parse_kexinit:
> hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-9
> 6,hmac-md5-96
> debug2: kex_parse_kexinit: none,zlib
> debug2: kex_parse_kexinit: none,zlib
> debug2: kex_parse_kexinit:
> debug2: kex_parse_kexinit:
> debug2: kex_parse_kexinit: first_kex_follows 0
> debug2: kex_parse_kexinit: reserved 0
> debug2: kex_parse_kexinit:
> diffie-hellman-group-exchange-sha1,diffie-hellman-group1-sha1
> debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
> debug2: kex_parse_kexinit:
> aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-c
> bc,rijndael-cbc@lysator.liu.se
> debug2: kex_parse_kexinit:
> aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-c
> bc,rijndael-cbc@lysator.liu.se
> debug2: kex_parse_kexinit:
> hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-9
> 6,hmac-md5-96
> debug2: kex_parse_kexinit:
> hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-9
> 6,hmac-md5-96
> debug2: kex_parse_kexinit: none,zlib
> debug2: kex_parse_kexinit: none,zlib
> debug2: kex_parse_kexinit:
> debug2: kex_parse_kexinit:
> debug2: kex_parse_kexinit: first_kex_follows 0
> debug2: kex_parse_kexinit: reserved 0
> debug2: mac_init: found hmac-md5
> debug1: kex: server->client aes128-cbc hmac-md5 none
> debug2: mac_init: found hmac-md5
> debug1: kex: client->server aes128-cbc hmac-md5 none
> debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent
> debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
> debug2: dh_gen_key: priv key bits set: 140/256
> debug2: bits set: 511/1024
> debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
> debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
> debug3: check_host_in_hostfile: filename /home/xxx/.ssh/known_hosts
> debug3: check_host_in_hostfile: match line 1
> debug3: check_host_in_hostfile: filename /home/xxx/.ssh/known_hosts
> debug3: check_host_in_hostfile: match line 1
> debug1: Host 'xxx.xxx.xxx' is known and matches the RSA host key.
> debug1: Found key in /home/xxx/.ssh/known_hosts:1
> debug2: bits set: 536/1024
> debug1: ssh_rsa_verify: signature correct
> debug2: kex_derive_keys
> debug2: set_newkeys: mode 1
> debug1: SSH2_MSG_NEWKEYS sent
> debug1: expecting SSH2_MSG_NEWKEYS
> debug2: set_newkeys: mode 0
> debug1: SSH2_MSG_NEWKEYS received
> debug1: SSH2_MSG_SERVICE_REQUEST sent
> debug2: service_accept: ssh-userauth
> debug1: SSH2_MSG_SERVICE_ACCEPT received
> debug2: key: /home/xxx/.ssh/identity (0x0)
> debug2: key: /home/xxx/.ssh/id_rsa (0x0)
> debug2: key: /home/xxx/.ssh/id_dsa (0x100eeb98)
> debug1: Authentications that can continue: publickey,password
> debug3: start over, passed a different list publickey,password
> debug3: preferred publickey,keyboard-interactive,password
> debug3: authmethod_lookup publickey
> debug3: remaining preferred: keyboard-interactive,password
> debug3: authmethod_is_enabled publickey
> debug1: Next authentication method: publickey
> debug1: Trying private key: /home/xxx/.ssh/identity
> debug3: no such identity: /home/xxx/.ssh/identity
> debug1: Trying private key: /home/xxx/.ssh/id_rsa
> debug3: no such identity: /home/xxx/.ssh/id_rsa
> debug1: Offering public key: /home/xxx/.ssh/id_dsa
> debug3: send_pubkey_test
> debug2: we sent a publickey packet, wait for reply
> debug1: Server accepts key: pkalg ssh-dss blen 433
> debug2: input_userauth_pk_ok: fp
> a3:d2:0a:dc:22:84:17:37:13:1b:d9:c4:d6:7f:08:73debug3:
> sign_and_send_pubkey
> debug1: read PEM private key done: type DSA
> debug1: Authentication succeeded (publickey).
> debug2: fd 4 setting O_NONBLOCK
> debug2: fd 5 setting O_NONBLOCK
> debug2: fd 6 setting O_NONBLOCK
> debug1: channel 0: new [client-session]
> debug3: ssh_session2_open: channel_new: 0
> debug2: channel 0: send open
> debug1: Entering interactive session.
> debug2: callback start
> debug2: client_session2_setup: id 0
> debug2: channel 0: request shell confirm 0
> debug2: callback done
> debug2: channel 0: open confirm rwindow 0 rmax 32768
> debug2: channel 0: rcvd adjust 131072
> debug2: channel 0: read<=0 rfd 4 len 0
> debug2: channel 0: read failed
> debug2: channel 0: close_read
> debug2: channel 0: input open -> drain
> debug2: channel 0: ibuf empty
> debug2: channel 0: send eof
> debug2: channel 0: input drain -> closed
> debug1: client_input_channel_req: channel 0 rtype exit-status reply 0
> debug2: channel 0: rcvd eof
> debug2: channel 0: output open -> drain
> debug2: channel 0: rcvd close
> debug3: channel 0: will not send data after close
> er close
> 
> 
> 
> 
> --
> Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
> Problem reports:       http://cygwin.com/problems.html
> Documentation:         http://cygwin.com/docs.html
> FAQ:                   http://cygwin.com/faq/
> 
> 
> --
> Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
> Problem reports:       http://cygwin.com/problems.html
> Documentation:         http://cygwin.com/docs.html
> FAQ:                   http://cygwin.com/faq/
> 


--
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
Problem reports:       http://cygwin.com/problems.html
Documentation:         http://cygwin.com/docs.html
FAQ:                   http://cygwin.com/faq/


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]