This is the mail archive of the
cygwin-xfree@cygwin.com
mailing list for the Cygwin XFree86 project.
RE: ctwm + xmkmf
- To: "'cygwin-xfree at cygwin dot com'" <cygwin-xfree at cygwin dot com>
- Subject: RE: ctwm + xmkmf
- From: "Lemke, Michael ISC 1" <lemkemch at de dot ina dot com>
- Date: Wed, 12 Sep 2001 16:34:49 +0200
See the thread at
http://cygwin.com/ml/cygwin-xfree/2001-q3/msg00889.html
xmkmf creates a broken Makefile out of ctwm's Imakefile, which
works fine on Linux.
Michael
What are looking for? What kind of problem are you facing?
xmkmf should work.
Suhaib
> -----Original Message-----
> From: Lemke, Michael ISC 1
> Sent: Wednesday, September 12, 2001 3:47 PM
> To: 'cygwin-xfree@cygwin.com'
> Subject: RE: ctwm + xmkmf
>
> Suhaib and others,
>
> I couldn't find any news about this on the list. Has anyone
> gotten a chance to have a closer look?
>
> Thanks,
> Michael
>
>
>
> Well, I will have a look at code. Right now, or today, I cannot.
> Suhaib
>
> > To: 'cygwin-xfree@cygwin.com'
> > Subject: FW: ctwm + xmkmf
> >
> >
> > >
> > > > No, I don't (doesn't come with Xfree, right?).
> >
> > yes
> >
> > <So I just
> > > > #undef XPM in Imakefile with almost the same result:
> > > >
> > > >
> >
> >
> > I do not see you undef it in Imakefile. If you want that
> > then you need to prefix the following with XCOM
> > or you can copy xpm file from Linux to same directory under
> > Cygwin/Xfree86
> >
> >
> > Well, there is a #undef at the beginning of the Imakefile. But I
> > just deleted the whole PIXMAPFILES line. Still no luck. And
> > doesn't PIXMAPFILES refer to xpm files that come with ctwm?
> > At least they are all in xpm/ in the ctwm source directory.
> >
> > New *makefiles:
> >
> >
> > <<Imakefile>> <<Makefile>>
> >
> >
> >
> > PIXMAPFILES = xpm/IslandD.xpm xpm/mail1.xpm
> > xpm/xgopher.xpm \
> > xpm/IslandW.xpm xpm/nothing.xpm
> > xpm/xgrab.xpm
> > \
> > xpm/LRom.xpm xpm/pixmap.xpm
> > xpm/xhpcalc.xpm \
> > xpm/LRom1.xpm xpm/postit.xpm
> > xpm/xmail.xpm
> > \
> > xpm/arthur.xpm xpm/term.xpm
> > xpm/xman.xpm \
> > xpm/cdrom1.xpm xpm/unknown.xpm
> > xpm/xnomail.xpm \
> > xpm/claude.xpm xpm/unread.xpm
> > xpm/xrn.goodnews.xpm \
> > xpm/datebook.xpm xpm/xarchie.xpm
> > xpm/xrn.nonews.xpm \
> > xpm/emacs.xpm xpm/xcalc.xpm
> > xpm/xrn.xpm \
> > xpm/hpterm.xpm xpm/xcalc2.xpm
> > xpm/xterm.xpm
> > \
> > xpm/mail0.xpm xpm/xedit.xpm
> > xpm/welcome.xpm \
> > xpm/audio_editor.xpm xpm/clipboard.xpm
> > xpm/ghostview.xpm \
> > xpm/xirc.xpm xpm/xmosaic.xpm
> > xpm/unknown1.xpm \
> > xpm/xrn-compose.xpm xpm/gnu-emacs1.xpm
> > xpm/gnu-emacs2.xpm \
> > xpm/gnu-emacs3.xpm xpm/gnu-emacs4.xpm
> > xpm/gnu-emacs5.xpm \
> > xpm/gnu-emacs6.xpm xpm/gnu-emacs7.xpm
> > xpm/skull.xpm
> > \
> > xpm/3D_Expand15.xpm xpm/3D_Iconify15.xpm
> > xpm/3D_Lightning15.xpm \
> > xpm/3D_Menu15.xpm xpm/3D_Resize15.xpm
> > xpm/3D_Zoom15.xpm \
> > xpm/background8.xpm xpm/spider.xpm \
> > xpm/ball1.xpm xpm/ball12.xpm xpm/ball4.xpm
> > xpm/ball7.xpm \
> > xpm/ball10.xpm xpm/ball2.xpm xpm/ball5.xpm
> > xpm/ball8.xpm \
> > xpm/ball11.xpm xpm/ball3.xpm xpm/ball6.xpm
> > xpm/ball9.xpm \
> > xpm/supman1.xbm xpm/supman4.xbm xpm/supman7.xbm \
> > xpm/supman2.xbm xpm/supman5.xbm xpm/supman8.xbm \
> > xpm/supman3.xbm xpm/supman6.xbm xpm/supman9.xbm \
> > xpm/nt1.xpm xpm/nt2.xpm xpm/xftp.xpm
> > xpm/welcome.xwd \
> > 3dcircle.xpm 3ddimple.xpm 3ddot.xpm
> > 3dfeet.xpm 3dleopard.xpm \
> > 3dpie.xpm 3dpyramid.xpm 3dslant
> >
> >
> > > >
> > > > <<Imakefile>> <<Makefile>>
> > > > Still xpm's fault?
> > > >
> > > >
> > > > Thanks,
> > > > Michael
> > > >
> > > >
> > > > It stops after Object files, when it hits the lines for xpm in
> > > > Imakefile. Do you have xpm directory awith files? If not
> > > that is the
> > > > cause of problems.
> > > >
> > > > Suhaib
> > > >
> > > > > -----Original Message-----
> > > > > From: Lemke, Michael ISC 1 [mailto:lemkemch@de.ina.com]
> > > > > Sent: Wednesday, August 22, 2001 10:39 AM
> > > > > To: 'cygwin-xfree@cygwin.com'
> > > > > Subject: RE: ctwm + xmkmf
> > > > >
> > > > >
> > > > > > Here it is:
> > > > > >
> > > > > >
> > > > > > <<Makefile>>
> > > > > >
> > > > > >
> > > > > > Michael
> > > > > >
> > > > > > >Post your generated Makefile.
> > > > > >
> > > > > > >Suhaib
> > > > > > >
> > > > > > >>
> > > > > > >>
> > > > > > >> Last night I tried to build ctwm3.5.2 after I just
> > installed
> > > > > > >> the 4.1.0 release of xfree86/cygwin. Build
> > > instructions say to
> > > > > > >> run xmkmf followed by make. However, the
> > generated Makefile
> > > > > > >> seems very incomplete. I tried the same on Linux to
> > > make sure
> > > > > > >> it isn't a ctwm issue but it ran just fine. Is
> > > there a problem
> > > > > > >> with xmkmf? I attach the Imakefile in case it
> > helps to track
> > > > > > >> down the problem. I am not really familiar with
> > Imakefiles.
> > > > > > >> But I am really impressed by xfree86 on cygwin,
> > > execllent work!
> > > > > > >> I managed to build pgplot and everything runs great.
> > > And so do
> > > > > > >> xsessions to Solaris,
> > > > > brilliant.
> > > > > > >>
> > > > > > >> Thanks,
> > > > > > >> Michael
> > > > > > >>
> > > > > > >>
> > > > > > >> <<Imakefile>>
> > > > > > >>
> > > > > > >>
> > > > > >
> > > > >
> > > >
> > > >
> > >
> >
> >
>