This is the mail archive of the crossgcc@sourceware.org mailing list for the crossgcc project.
See crosstool-NG for lots more information.
Index Nav: | [Date Index] [Subject Index] [Author Index] [Thread Index] | |
---|---|---|
Message Nav: | [Date Prev] [Date Next] | [Thread Prev] [Thread Next] |
Other format: | [Raw text] |
On Thu, 30 Nov 2017 14:29:59 +0000 Josh Branning <lovell.joshyyy@gmail.com> wrote: > On 30/11/17 08:13, Robert Bielik wrote: > > Hi all, > > > > New to the tool! I'm planning to use this for setting up a complete > > build toolchain for Raspberry Pi 3. This means building f.i. > > ALSA/GStreamer/LADSPA etc. etc. and installing them in the proper > > rootfs which will be packaged together with the toolchain. > > > > I suspect this is out of the scope of the ct-ng tool ? Maybe > > someone has ideas or pointers on how to accomplish this ? > > > > Regards > > /Robert > > > > > > > > Hi, > > I once did something similar for the olinuxino lime A10. > > I compiled uboot and a kernel and used an arch linux arm rootfs. > > The scripts can be found as a tar.gz > > They are probably out of date, but can be modified and can give a > skeleton for you to work with. > > http://www.publicsite.org/J05HYYY/software_downloads/olinuxinolime-archlinux.tar.gz > > I'm not quite sure about the bootloader in the pi however, whether or > not it can use uboot. The pi needs a blob to run IIRC. > > You may also wish to look at https://github.com/RPi-Distro/Pi-gen > which creates the isos for raspbian from the pi foundation. > > Josh In addition to buildroot, you can also use the Yocto Project (https://www.yoctoproject.org). There are people that have added R-Pi "layers" for the Raspberry-Pi. One of them is this one: https://github.com/jumpnow/meta-rpi . -Bill
Index Nav: | [Date Index] [Subject Index] [Author Index] [Thread Index] | |
---|---|---|
Message Nav: | [Date Prev] [Date Next] | [Thread Prev] [Thread Next] |