Re: Build error: link tests are not allowed after GCC_NO_EXECUTABLES

[Zhenqiang Chen <zhenqiang dot chen at linaro dot org>]

On 7 January 2014 06:13, Danny Gale
<Daniel.Gale@coloradoengineeringinc.com> wrote:
> Hi all,
>
> I've duplicated the 64-bit powerpc build listed on the website,
> powerpc64-unknown-linux-gnu. I'm now trying to build specifically for a
> Freescale processor using the e6500 core, powerpc64-e6500-linux-gnu. Their
> SDK was built using Yocto and bitbake -- the powers that be have decided it
> needs to be converted to a Crosstool-NG based build for our use. I'm running
> into some trouble.
>
> The Freescale SDK in question is here
> (http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=SDKLINUX&fpsp=1&tab=Design_Tools_Tab)
> . I've been working with v1.4, though I see now they've released v1.5. I've
> brought over their patches from the Yocto build tree and Crosstool-NG is
> configured to use the same versions of the various packages that Freescale
> used. While building pass-1 gcc with Crosstool-NG, the build fails with:
> configure: error: Link tests are not allowed after GCC_NO_EXECUTABLES .

Please try to install multib-gcc and multilib-g++ in your host machine.
Or configure your gcc with "--with-system-zlib"

> I found and tried a couple of fixes for this, but none of them have resolved
> the problem: removing optimization for size on the libraries, not compiling
> for c++ support, not statically linking libstdc++. What else can cause this
> and how can it be resolved?
>
> I've attached both my config file and the tail of the log file in case that
> will help in diagnosis. Note that multilib is enabled because Freescale says
> it's required for building u-boot
>
> Thanks for your help,
> Danny
>
> --
> For unsubscribe information see http://sourceware.org/lists.html#faq

--
For unsubscribe information see http://sourceware.org/lists.html#faq