This is the mail archive of the crossgcc@sourceware.org mailing list for the crossgcc project.
See crosstool-NG for lots more information.
Index Nav: | [Date Index] [Subject Index] [Author Index] [Thread Index] | |
---|---|---|
Message Nav: | [Date Prev] [Date Next] | [Thread Prev] [Thread Next] |
Other format: | [Raw text] |
HiI have encounted same issues, in same environment: x74 win7 + Cywin 1.7.17 issue1: zconf.tab.o:zconf.tab.c:(.text+0x1671): undefined reference to `_libintl_gettext'
issue2: Makefile:240: *** mixed implicit and normal rules. Stop. issue3: That seems slow! but now, has already fixed them before. in brief, the (best) solution is:1. for issue1: zconf.tab.o:zconf.tab.c:(.text+0x1671): undefined reference to `_libintl_gettext'
reason: lack related lib (when build under Cygwin) solution: change the makefile crosstool-ng-1.18.0\kconfig\Makefile to add intl and curses lib for conf, mconf, nconf like this: # Whatâs needed to build âconfâ conf_SRC = conf.c conf_OBJ = $(patsubst %.c,%.o,$(conf_SRC)) conf_DEP = $(patsubst %.o,%.dep,$(conf_OBJ)) $(conf_OBJ) $(conf_DEP): CFLAGS += $(INTL_CFLAGS) conf: LDFLAGS += -lintl # Whatâs needed to build âmconfâ mconf_SRC = mconf.c mconf_OBJ = $(patsubst %.c,%.o,$(mconf_SRC)) mconf_DEP = $(patsubst %.c,%.dep,$(mconf_SRC)) $(mconf_OBJ) $(mconf_DEP): CFLAGS += $(NCURSES_CFLAGS) $(INTL_CFLAGS) #mconf: LDFLAGS += $(NCURSES_LDFLAGS) mconf: LDFLAGS += -lintl $(NCURSES_LDFLAGS) # Whatâs needed to build ânconfâ nconf_SRC = nconf.c nconf.gui.c nconf_OBJ = $(patsubst %.c,%.o,$(nconf_SRC)) nconf_DEP = $(patsubst %.c,%.dep,$(nconf_SRC)) #$(nconf_OBJ) $(nconf_DEP): CFLAGS += $(INTL_CFLAGS) -I/usr/include/ncurses #nconf: LDFLAGS += -lmenu -lpanel -lncurses $(nconf_OBJ) $(nconf_DEP): CFLAGS += -I/usr/include/ncurses/ $(INTL_CFLAGS) nconf: LDFLAGS += -lintl -lmenu -lpanel -lncurses 2. for issue2: Makefile:240: *** mixed implicit and normal rules. Stop. reason: make v3.81 support those "mixed implicit and normal rules" but new v3.82 make, not support them. solution: use crosstool-ng (included) companion make: in ct-ng menuconfig, config to use its (v3.81) make: Paths and misc options â> [*] Try features marked as EXPERIMENTAL Companion tools â> [*] Build some companion tools [*] make 3. for issue3: That seems slow! config crosstool-ng to use multithread, such as 4 thread: Paths and misc options (4) Number of parallel jobsfor more details, can refer my posts(written in Chinese, you can use google translate it to English): 1. for issue1: zconf.tab.o:zconf.tab.c:(.text+0x1671): undefined reference to `_libintl_gettext'
http://www.crifan.com/crosstool_ng_cygwin_zconf_tab_o_zconf_tab_c_text_0x162a_undefined_reference_to_libintl_gettext/ http://www.crifan.com/crosstool_ng_cygwin_zconf_tab_o_zconf_tab_c_text_0x162a_undefined_reference_to_libintl_gettext-2/ 2. for issue2: Makefile:240: *** mixed implicit and normal rules. Stop. http://www.crifan.com/crosstool_ng_makefile_mixed_implicit_and_normal_rules_stop/ http://www.crifan.com/cygwin_make_linux_kernel_makefile_mixed_implicit_and_normal_rules_stop/ 3. for issue3: That seems slow! http://www.crifan.com/summary_crosstool_ng_note/ Crifan Li Jeremy Cole-Baker wrote on Fri, 28 Jun 2013 09:17:09 +1200: > Hello all, >> I've been instructed to get a cross-compiler for Power PC working under Cygwin (crazy idea I know, but that's what they want!). Having trouble, though.
> >> I have tried crisstools-ng version 1.17 and 1.18, but they won't build. "Configure" seemed to work fine, but "make" for both versions stopped with this error:
> > > $make > SED 'ct-ng' > SED 'scripts/crosstool-NG.sh' > SED 'scripts/saveSample.sh' > SED 'scripts/showTuple.sh' > GEN 'config/configure.in' > GEN 'paths.mk' > GEN 'paths.sh' > DEP 'nconf.gui.dep' > DEP 'nconf.dep' > DEP 'lxdialog/checklist.dep' > DEP 'lxdialog/inputbox.dep' > DEP 'lxdialog/util.dep' > DEP 'lxdialog/textbox.dep' > DEP 'lxdialog/yesno.dep' > DEP 'lxdialog/menubox.dep' > DEP 'mconf.dep' > DEP 'conf.dep' > BISON 'zconf.tab.c' > GPERF 'zconf.hash.c' > LEX 'lex.zconf.c' > DEP 'zconf.tab.dep' > CC 'zconf.tab.o' > CC 'conf.o' > LD 'conf' >> zconf.tab.o:zconf.tab.c:(.text+0x1671): undefined reference to `_libintl_gettext' zconf.tab.o:zconf.tab.c:(.text+0x4845): undefined reference to `_libintl_gettext' zconf.tab.o:zconf.tab.c:(.text+0x5733): undefined reference to `_libintl_gettext' zconf.tab.o:zconf.tab.c:(.text+0x5905): undefined reference to `_libintl_gettext' zconf.tab.o:zconf.tab.c:(.text+0xc750): undefined reference to `_libintl_gettext' zconf.tab.o:zconf.tab.c:(.text+0xc75e): more undefined references to `_libintl_gettext' follow /usr/lib/gcc/i686-pc-cygwin/4.5.3/../../../../i686-pc-cygwin/bin/ld: zconf.tab.o: bad reloc address 0x110 in section `.data' /usr/lib/gcc/i686-pc-cygwin/4.5.3/../../../../i686-pc-cygwin/bin/ld: final link failed: Invalid operation
> > collect2: ld returned 1 exit status > Makefile:108: recipe for target `conf' failed > make[2]: *** [conf] Error 1 > Makefile:160: recipe for target `build-lib-kconfig' failed > make[1]: *** [build-lib-kconfig] Error 2 > Makefile:120: recipe for target `build' failed > make: *** [build] Error 2 >> My system is Windows 7 64 bit, and I installed the latest Cygwin (I think it's 1.7). I installed all the dev tools in the Cygwin setup.
> > > > This may or may not be relevant, but: >> A couple of days ago, I downloaded and installed crosstools-ng 1.9 (because it was at the bottom of the page! I guess I failed the first intelligence test!).
> >> 1.9 built OK, and I was able to run the "menuconfig" option and set up my toolchain. Running the toolchain build took a loooooooooooooooong time (11 hours!) and eventually ended with an error. Here are the last few lines of the log file:
> >> [ALL ] make[3]: Entering directory `/opt/build_gcc_xtools/targets/src/glibc-2.9/wctype' [ALL ] /opt/build_gcc_xtools/targets/tools/bin/install -c -m 644 wctype.h /opt/x-tools/powerpc-unknown-linux-gnu/powerpc-unknown-linux-gnu//sys-root/usr/include/wctype.h [ALL ] make[3]: Leaving directory `/opt/build_gcc_xtools/targets/src/glibc-2.9/wctype'
>> [ALL ] /usr/bin/make -j2 subdir=manual -C manual ..=../ install-headers
>> [ALL ] make[3]: Entering directory `/opt/build_gcc_xtools/targets/src/glibc-2.9/manual'
> > [ALL ] Makefile:240: *** mixed implicit and normal rules. Stop. >> [ALL ] make[3]: Leaving directory `/opt/build_gcc_xtools/targets/src/glibc-2.9/manual'
>> [ALL ] Makefile:207: recipe for target `manual/install-headers' failed
> [ERROR] make[2]: *** [manual/install-headers] Error 2 >> [ALL ] make[2]: Leaving directory `/opt/build_gcc_xtools/targets/src/glibc-2.9'
> > [ALL ] Makefile:12: recipe for target `install-headers' failed > [ERROR] make[1]: *** [install-headers] Error 2 >> [ALL ] make[1]: Leaving directory `/opt/build_gcc_xtools/targets/powerpc-unknown-linux-gnu/build/build-libc-headers'
> > [ERROR] Build failed in step 'Installing C library headers' >> [ERROR] Error happened in '/usr/crosstool/lib/ct-ng-1.9.3/scripts/functions' in function 'CT_DoExecLog' (line unknown, sorry) [ERROR] called from '/usr/crosstool/lib/ct-ng-1.9.3/scripts/build/libc/glibc.sh' at line # 175 in function 'do_libc_headers' [ERROR] called from '/usr/crosstool/lib/ct-ng-1.9.3/scripts/crosstool-NG.sh' at line # 597 in function 'main' [ERROR] Look at '/opt/x-tools/powerpc-unknown-linux-gnu/build.log' for more info on this error.
> > [ERROR] (elapsed: 686:48.54) > > That seems slow! (Athlon 64 X2 dual core @ 3.1 Ghz and 6 GB RAM). >> I've become completely obsessed by this task (i.e. building a toolchain for cygwin) and I've lost all sense of perspective, so suggestions would be appreciated!
> > > Thanks, > Jeremy > > > -- > Riverhead Technology > Jeremy Cole-Baker > Ph. (+64) 27 673 0129 > www.rhtech.co.nz -- For unsubscribe information see http://sourceware.org/lists.html#faq
Index Nav: | [Date Index] [Subject Index] [Author Index] [Thread Index] | |
---|---|---|
Message Nav: | [Date Prev] [Date Next] | [Thread Prev] [Thread Next] |