This is the mail archive of the crossgcc@sourceware.org mailing list for the crossgcc project.
See crosstool-NG for lots more information.
Index Nav: | [Date Index] [Subject Index] [Author Index] [Thread Index] | |
---|---|---|
Message Nav: | [Date Prev] [Date Next] | [Thread Prev] [Thread Next] |
Other format: | [Raw text] |
Hi Bryan, Attached the new .config Now I got the following error: [ALL ] ./libtool: line 466: CDPATH: command not found [ALL ] ./libtool: line 466: CDPATH: command not found [ALL ] ./libtool: line 1144: func_opt_split: command not found [ALL ] libtool: Version mismatch error. This is libtool 2.2.6 Debian-2.2.6a-1ubuntu1, but the [ALL ] libtool: definition of this LT_INIT comes from an older release. [ALL ] libtool: You should recreate aclocal.m4 with macros from libtool 2.2.6 Debian-2.2.6a-1ubuntu1 [ALL ] libtool: and run autoconf again. [ERROR] make[1]: *** [block.lo] Error 1 [ALL ] make[1]: *** Waiting for unfinished jobs.... [ALL ] ./libtool: line 466: CDPATH: command not found [ALL ] ./libtool: line 1144: func_opt_split: command not found [ALL ] libtool: Version mismatch error. This is libtool 2.2.6 Debian-2.2.6a-1ubuntu1, but the [ALL ] libtool: definition of this LT_INIT comes from an older release. [ALL ] libtool: You should recreate aclocal.m4 with macros from libtool 2.2.6 Debian-2.2.6a-1ubuntu1 [ALL ] libtool: and run autoconf again. [ERROR] make[1]: *** [names.lo] Error 1 [ALL ] ./libtool: line 1144: func_opt_split: command not found [ALL ] libtool: Version mismatch error. This is libtool 2.2.6 Debian-2.2.6a-1ubuntu1, but the [ALL ] libtool: definition of this LT_INIT comes from an older release. [ALL ] libtool: You should recreate aclocal.m4 with macros from libtool 2.2.6 Debian-2.2.6a-1ubuntu1 [ALL ] libtool: and run autoconf again. [ERROR] make[1]: *** [loop.lo] Error 1 [ALL ] make[1]: Leaving directory `/home/zvivered/GNU/ct-ng-1.16.0/bin/.build/i686-nptl-linux-gnu/build/build-cloog-ppl-host-i686-build_pc-linux-gnu' [ERROR] [ERROR] >> [ERROR] >> Build failed in step 'Installing CLooG/PPL for host' [ERROR] >> called in step '(top-level)' [ERROR] >> [ERROR] >> Error happened in: CT_DoExecLog[scripts/functions@158] [ERROR] >> called from: do_cloog_backend[scripts/build/companion_libs/cloog.sh@111] [ERROR] >> called from: do_cloog_for_host[scripts/build/companion_libs/cloog.sh@72] [ERROR] >> called from: main[scripts/crosstool-NG.sh@598] [ERROR] >> [ERROR] >> For more info on this error, look at the file: 'build.log' [ERROR] >> There is a list of known issues, some with workarounds, in: [ERROR] >> '/home/zvivered/GNU/ct-ng-1.16.0/share/doc/crosstool-ng/ct-ng.1.16.0/B - Known issues.txt' [ERROR] I did not install libtool manually. I have one libtool installed by CENTOS: ltmain.sh (GNU libtool) 1.5.22 (1.1220.2.365 2005/12/18 22:14:06) I installed automake 1.10, autoconf 2.60 ***manually*** because crosstool-ng failed at earlier stages. (./configure, make, make install). But when I checked "companion tools", crosstool should ignore them. Am I right ? Can you help ? Thanks, Zvika On Sun, Oct 7, 2012 at 3:24 AM, Bryan Hundven <bryanhundven@gmail.com> wrote: > Zvika > > On Sat, Oct 6, 2012 at 4:23 PM, Zvi Vered <veredz72@gmail.com> wrote: >> Hi Bryan, >> >> Did you mean: >> ./configure --prefix=$HOME/GNU/ct-ng-1.16.0 --without-automake >> --without-libtool --without-libtoolize >> ? > > No, It's in 'ct-ng menuconfig'. You should find it under the > "companion tools" menu. > >> But now I got the following error: >> >> Already extracted 'linux-3.4.7' >> [DEBUG] Already patched 'linux-3.4.7' >> [DEBUG] Already extracted 'gmp-4.3.2' >> [DEBUG] Already patched 'gmp-4.3.2' >> [DEBUG] Already extracted 'mpfr-2.4.2' >> [DEBUG] Already patched 'mpfr-2.4.2' >> [DEBUG] Running autoreconf >> [DEBUG] ==> Executing: 'autoreconf' >> [ERROR] acinclude.m4:26: error: Autoconf version 2.60 or higher is required >> [ALL ] acinclude.m4:26: the top level >> [ALL ] autom4te: /usr/bin/m4 failed with exit status: 63 >> [ALL ] aclocal: autom4te failed with exit status: 63 >> [ALL ] autoreconf: aclocal failed with exit status: 63 >> [ERROR] >> >> I ran "yum install autoconf" and it installs autoconf 2.59 >> >> What autoconf should I install and how ? >> >> Thanks, >> Zvika >> >> On Sat, Oct 6, 2012 at 9:05 PM, Bryan Hundven <bryanhundven@gmail.com> wrote: >>> Zvi, >>> >>> On Sat, Oct 6, 2012 at 12:02 PM, Zvi Vered <veredz72@gmail.com> wrote: >>>> Dear Mr. Hundven, >>> >>> My name is Bryan. ;) >>> >>>> >>>> How can I set ct-ng to use "companion tools bundled with ct-ng" ? >>> >>> Read the documentation: >>> >>> http://crosstool-ng.org/hg/crosstool-ng/raw-file/43ace4bb005e/docs/3%20-%20Configuring%20a%20toolchain.txt >>> >>>> The output of "libtool --version" is: >>>> ltmain.sh (GNU libtool) 1.5.22 (1.1220.2.365 2005/12/18 22:14:06) >>>> I used "yum install" to install it. >>>> >>>> This is weird. According to .configure --help, the minimum libtool >>>> version should be: >>>> 1.5.26 >>>> But running .configure does not alert on a libtool problem. >>>> Can this cause the problem ? >>>> >>>> I tried pastebin but I should be a PRO user to paste all build.log >>>> >>>> You help is highly appreciated. >>>> >>>> Thanks, >>>> Zvika >>>> >>>> On Sat, Oct 6, 2012 at 10:10 AM, Bryan Hundven <bryanhundven@gmail.com> wrote: >>>>> On Fri, Oct 5, 2012 at 10:14 PM, Zvi Vered <veredz72@gmail.com> wrote: >>>>>> Hello, >>>>>> >>>>>> I'm using crosstool-ng 1.16.0 to create a toolchain for >>>>>> "i686-nptl-linux-gnu" under centos 5.3 >>>>>> >>>>>> I got the following error: >>>>>> >>>>>> [ALL ] ./libtool: line 466: CDPATH: command not found >>>>>> [ALL ] ./libtool: line 466: CDPATH: command not found >>>>>> [ALL ] ./libtool: line 1144: func_opt_split: command not found >>>>>> [ALL ] libtool: Version mismatch error. This is libtool 2.2.6 >>>>>> Debian-2.2.6a-1ubuntu1, but the >>>>>> [ALL ] libtool: definition of this LT_INIT comes from an older release. >>>>>> [ALL ] libtool: You should recreate aclocal.m4 with macros from >>>>>> libtool 2.2.6 Debian-2.2.6a-1ubuntu1 >>>>>> [ALL ] libtool: and run autoconf again. >>>>>> [ERROR] make[1]: *** [loop.lo] Error 1 >>>>>> [ALL ] make[1]: *** Waiting for unfinished jobs.... >>>>>> [ALL ] ./libtool: line 466: CDPATH: command not found >>>>>> [ALL ] ./libtool: line 1144: func_opt_split: command not found >>>>>> [ALL ] libtool: Version mismatch error. This is libtool 2.2.6 >>>>>> Debian-2.2.6a-1ubuntu1, but the >>>>>> [ALL ] libtool: definition of this LT_INIT comes from an older release. >>>>>> [ALL ] libtool: You should recreate aclocal.m4 with macros from >>>>>> libtool 2.2.6 Debian-2.2.6a-1ubuntu1 >>>>>> [ALL ] libtool: and run autoconf again. >>>>>> [ERROR] make[1]: *** [block.lo] Error 1 >>>>>> [ALL ] ./libtool: line 1144: func_opt_split: command not found >>>>>> [ALL ] libtool: Version mismatch error. This is libtool 2.2.6 >>>>>> Debian-2.2.6a-1ubuntu1, but the >>>>>> [ALL ] libtool: definition of this LT_INIT comes from an older release. >>>>>> [ALL ] libtool: You should recreate aclocal.m4 with macros from >>>>>> libtool 2.2.6 Debian-2.2.6a-1ubuntu1 >>>>>> [ALL ] libtool: and run autoconf again. >>>>>> [ERROR] make[1]: *** [names.lo] Error 1 >>>>>> [ALL ] make[1]: Leaving directory >>>>>> `/home/zvivered/GNU/ct-ng-1.16.0/working/i686-nptl-linux-gnu/build/build-cloog-ppl-host-i686-build_pc-linux-gnu' >>>>>> [ERROR] >>>>>> [ERROR] >> >>>>>> [ERROR] >> Build failed in step 'Installing CLooG/PPL for host' >>>>>> [ERROR] >> called in step '(top-level)' >>>>>> [ERROR] >> >>>>>> [ERROR] >> Error happened in: CT_DoExecLog[scripts/functions@158] >>>>>> [ERROR] >> called from: >>>>>> do_cloog_backend[scripts/build/companion_libs/cloog.sh@111] >>>>>> [ERROR] >> called from: >>>>>> do_cloog_for_host[scripts/build/companion_libs/cloog.sh@72] >>>>>> [ERROR] >> called from: main[scripts/crosstool-NG.sh@598] >>>>>> [ERROR] >> >>>>>> [ERROR] >> For more info on this error, look at the file: 'build.log' >>>>>> [ERROR] >> There is a list of known issues, some with workarounds, in: >>>>>> [ERROR] >> >>>>>> '/home/zvivered/GNU/ct-ng-1.16.0/share/doc/crosstool-ng/ct-ng.1.16.0/B >>>>>> - Known issues.txt' >>>>>> [ERROR] >>>>>> [ERROR] (elapsed: 6:05.48) >>>>>> >>>>>> Attached config.ng (copy of .config). >>>>>> >>>>>> Can you help find the problem ? >>>>>> >>>>>> Thanks, >>>>>> Zvika >>>>>> >>>>>> -- >>>>>> For unsubscribe information see http://sourceware.org/lists.html#faq >>>>> >>>>> Zvi, >>>>> >>>>> Having the full log - posted to pastebin, or similar site, or hosted >>>>> on some other web site to save space on the mailing list - would also >>>>> be very helpful in this situation. >>>>> >>>>> From what I read, it looks like you have two different versions of >>>>> libtool in the same path!?! weird! >>>>> >>>>> Have you tried cloog 0.15.11? >>>>> >>>>> As I said in my previous message about automake, try using the >>>>> companion tools bundled with ct-ng. >>>>> ( http://sourceware.org/ml/crossgcc/2012-10/msg00014.html ) >>>>> >>>>>># CT_COMP_TOOLS is not set >>>>> >>>>> Not all systems are compatible with ct-ng, which is why we provide m4, >>>>> autoconf, automake, libtool, and make. >>>>> >>>>> Also, this only seems to be a problem with cloog-ppl, have you also >>>>> tried google searching around for similar cloog build errors? This >>>>> doesn't look like it would be specific to crosstool-ng, but having the >>>>> full build log might prove that otherwise. >>>>> >>>>> -Bryan >>> >>> -Bryan > > -Bryan
Attachment:
config.ng
Description: Binary data
-- For unsubscribe information see http://sourceware.org/lists.html#faq
Index Nav: | [Date Index] [Subject Index] [Author Index] [Thread Index] | |
---|---|---|
Message Nav: | [Date Prev] [Date Next] | [Thread Prev] [Thread Next] |