This is the mail archive of the crossgcc@sourceware.org mailing list for the crossgcc project.

See the CrossGCC FAQ for lots more information.

Index Nav:	[Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav:	[Date Prev] [Date Next]	[Thread Prev] [Thread Next]
Other format:	[Raw text]

Re: Error building glibc-2.3.2 for my arm-9tdmi-linux cross compiler on cygwin

From: Vin Shelton <acs at alumni dot princeton dot edu>
To: J Johnson <juke dot johnson at yahoo dot com>
Cc: crossgcc at sourceware dot org
Date: Tue, 15 Jan 2008 17:25:55 -0500
Subject: Re: Error building glibc-2.3.2 for my arm-9tdmi-linux cross compiler on cygwin
Newsgroups: gmane.comp.gcc.cross-compiling
References: <71292.72598.qm@web57413.mail.re1.yahoo.com>

J Johnson wrote:

Anyone seen anything like the error I've listed below? It appears while building the glibc-2.3.2 for inclusion in my arm-9tdmi-linux cross compiler. It strikes me as a cygwin issue but I had figured something related to cygwin would have been long resolved in these builds so maybe it's something with my config? In any case, here's the output:

Thanks to anyone that can help! I'll even take wild guesses :)

------------------------- BEGIN ERROR OUTPUT -------------------------

running configure fragment for /ecos-c/CNAV/tmp2/crosstool-0.43/build/arm-9tdmi-linux-gnu/gcc-4.1.0-glibc-2.3.2/glibc-2.
3.2/sysdeps/unix/sysv/linux
checking for egrep... (cached) grep -E
checking installed Linux kernel header files... 2.0.10 or later
*** WARNING: Are you sure you do not want to use the `linuxthreads'
*** add-on?
running configure fragment for /ecos-c/CNAV/tmp2/crosstool-0.43/build/arm-9tdmi-linux-gnu/gcc-4.1.0-glibc-2.3.2/glibc-2.
3.2/sysdeps/unix/common
running configure fragment for /ecos-c/CNAV/tmp2/crosstool-0.43/build/arm-9tdmi-linux-gnu/gcc-4.1.0-glibc-2.3.2/glibc-2.
3.2/sysdeps/unix
running configure fragment for /ecos-c/CNAV/tmp2/crosstool-0.43/build/arm-9tdmi-linux-gnu/gcc-4.1.0-glibc-2.3.2/glibc-2.
3.2/sysdeps/generic
checking for old glibc 2.0.x headers... no
checking whether -fPIC is default... no
configure: creating ./config.status
config.status: creating config.make
config.status: creating glibcbug
config.status: creating Makefile
config.status: creating config.h
config.status: executing default commands
+ grep -q GLIBC_2.3 /ecos-c/CNAV/tmp2/crosstool-0.43/build/arm-9tdmi-linux-gnu/gcc-4.1.0-glibc-2.3.2/glibc-2.3.2/ChangeL
og
+ libc_cv_ppc_machine=yes
+ make CFLAGS=-DBOOTSTRAP_GCC sysdeps/gnu/errlist.c
make -r PARALLELMFLAGS="" CVSOPTS="" -C /ecos-c/CNAV/tmp2/crosstool-0.43/build/arm-9tdmi-linux-gnu/gcc-4.1.0-glibc-2.3.2
/glibc-2.3.2 objdir=`pwd` sysdeps/gnu/errlist.c
make[1]: Entering directory `/ecos-c/CNAV/tmp2/crosstool-0.43/build/arm-9tdmi-linux-gnu/gcc-4.1.0-glibc-2.3.2/glibc-2.3.
2'
(echo 'sysd-rules-sysdirs := sysdeps/arm/elf sysdeps/unix/sysv/linux/arm sysdeps/unix/sysv/linux sysdeps/gnu sysdeps/uni
x/common sysdeps/unix/mman sysdeps/unix/inet sysdeps/unix/sysv sysdeps/unix/arm sysdeps/unix sysdeps/posix sysdeps/arm/f
pu sysdeps/arm sysdeps/wordsize-32 sysdeps/ieee754/flt-32 sysdeps/ieee754/dbl-64 sysdeps/ieee754 sysdeps/generic/elf sys
deps/generic';                \
        for dir in '$(..)sysdeps/arm/elf' '$(..)sysdeps/unix/sysv/linux/arm' '$(..)sysdeps/unix/sysv/linux' '$(..)sysde
ps/gnu' '$(..)sysdeps/unix/common' '$(..)sysdeps/unix/mman' '$(..)sysdeps/unix/inet' '$(..)sysdeps/unix/sysv' '$(..)sysd
eps/unix/arm' '$(..)sysdeps/unix' '$(..)sysdeps/posix' '$(..)sysdeps/arm/fpu' '$(..)sysdeps/arm' '$(..)sysdeps/wordsize-
32' '$(..)sysdeps/ieee754/flt-32' '$(..)sysdeps/ieee754/dbl-64' '$(..)sysdeps/ieee754' '$(..)sysdeps/generic/elf' '$(..)
sysdeps/generic'; do                          \
          for o in .o .os .op .og .ob .oST; do \
              \
            echo "\$(objpfx)%$o: $dir/%.S \$(before-compile); \
                  \$(compile-command.S)";                                    \
            echo "\$(objpfx)%$o: $dir/%.s \$(before-compile); \
                  \$(compile-command.s)";                                    \
            echo "\$(objpfx)rtld-%$o: $dir/%.S \$(before-compile); \
                  \$(compile-command.S)";                                    \
            echo "\$(objpfx)rtld-%$o: $dir/%.s \$(before-compile); \
                  \$(compile-command.s)";                                    \
            echo "\$(objpfx)ptw-%$o: $dir/%.S \$(before-compile); \
                  \$(compile-command.S)";                                    \
            echo "\$(objpfx)ptw-%$o: $dir/%.s \$(before-compile); \
                  \$(compile-command.s)";                                    \
                \
            echo "\$(objpfx)%$o: $dir/%.c \$(before-compile); \
                  \$(compile-command.c)";                                    \
            echo "\$(objpfx)rtld-%$o: $dir/%.c \$(before-compile); \
                  \$(compile-command.c)";                                    \
            echo "\$(objpfx)ptw-%$o: $dir/%.c \$(before-compile); \
                  \$(compile-command.c)";                                    \
          done; \
            \
          echo "\$(objpfx)%.d: $dir/%.s \$(common-objpfx)dummy.d; \
                \$(make-dummy-dep)";                          \
          echo "\$(objpfx)rtld-%.d: $dir/%.s \$(common-objpfx)dummy.d; \
                \$(make-dummy-dep)";                          \
          echo "\$(objpfx)ptw-%.d: $dir/%.s \$(common-objpfx)dummy.d; \
                \$(make-dummy-dep)";                          \
          echo "\$(objpfx)%.d: $dir/%.S \$(before-compile); \
                \$(+make-deps)";                                              \
          echo "\$(objpfx)rtld-%.d: $dir/%.S \$(before-compile); \
                \$(+make-deps)";                                              \
          echo "\$(objpfx)ptw-%.d: $dir/%.S \$(before-compile); \
                \$(+make-deps)";                                              \
                \
          echo "\$(objpfx)%.d: $dir/%.c \$(before-compile); \
                \$(+make-deps)";                                              \
          echo "\$(objpfx)rtld-%.d: $dir/%.c \$(before-compile); \
                \$(+make-deps)";                                              \
          echo "\$(objpfx)ptw-%.d: $dir/%.c \$(before-compile); \
                \$(+make-deps)";                                              \
          echo "\$(objpfx)m_%.S: $dir/s_%.S; \$(+make-include-of-dep)";  \
          echo "\$(objpfx)m_%.c: $dir/s_%.c; \$(+make-include-of-dep)";  \
        done;                                                                \
        echo 'sysd-rules-done = t') > /ecos-c/CNAV/tmp2/crosstool-0.43/build/arm-9tdmi-linux-gnu/gcc-4.1.0-glibc-2.3.2/
build-glibc-headers/sysd-rulesT
mv -f /ecos-c/CNAV/tmp2/crosstool-0.43/build/arm-9tdmi-linux-gnu/gcc-4.1.0-glibc-2.3.2/build-glibc-headers/sysd-rulesT /
ecos-c/CNAV/tmp2/crosstool-0.43/build/arm-9tdmi-linux-gnu/gcc-4.1.0-glibc-2.3.2/build-glibc-headers/sysd-rules
for dir in /ecos-c/CNAV/tmp2/crosstool-0.43/build/arm-9tdmi-linux-gnu/gcc-4.1.0-glibc-2.3.2/build-glibc-headers sysdeps/
arm/elf sysdeps/unix/sysv/linux/arm sysdeps/unix/sysv/linux sysdeps/gnu sysdeps/unix/common sysdeps/unix/mman sysdeps/un
ix/inet sysdeps/unix/sysv sysdeps/unix/arm sysdeps/unix sysdeps/posix sysdeps/arm/fpu sysdeps/arm sysdeps/wordsize-32 sy
sdeps/ieee754/flt-32 sysdeps/ieee754/dbl-64 sysdeps/ieee754 sysdeps/generic/elf sysdeps/generic; do \
          test -f $dir/syscalls.list && \
          { /bin/sh sysdeps/unix/make-syscalls.sh $dir || exit 1; }; \
          test $dir = sysdeps/unix && break; \
        done > /ecos-c/CNAV/tmp2/crosstool-0.43/build/arm-9tdmi-linux-gnu/gcc-4.1.0-glibc-2.3.2/build-glibc-headers/sysd
-syscallsT
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
-rThe system cannot find the file specified.
mv -f /ecos-c/CNAV/tmp2/crosstool-0.43/build/arm-9tdmi-linux-gnu/gcc-4.1.0-glibc-2.3.2/build-glibc-headers/sysd-syscalls
T /ecos-c/CNAV/tmp2/crosstool-0.43/build/arm-9tdmi-linux-gnu/gcc-4.1.0-glibc-2.3.2/build-glibc-headers/sysd-syscalls
gawk 'BEGIN { subdirs = ""; inhibit = "" };                    \
                /^#/ { next };                                          \
                /^[^-]/ { subdirs = subdirs " " $0 };                  \
                /^-/ { inhibit = inhibit " " substr($0, 2) };          \
                END { printf "sysdep-subdirs =%s\n", subdirs;          \
                      printf "sysdep-inhibit-subdirs =%s\n", inhibit;  \
                      print "sysd-dirs-done = t" }'                    \
              /dev/null sysdeps/unix/inet/Subdirs sysdeps/unix/Subdirs > /ecos-c/CNAV/tmp2/crosstool-0.43/build/arm-9td
mi-linux-gnu/gcc-4.1.0-glibc-2.3.2/build-glibc-headers/sysd-dirs-tmp
mv -f /ecos-c/CNAV/tmp2/crosstool-0.43/build/arm-9tdmi-linux-gnu/gcc-4.1.0-glibc-2.3.2/build-glibc-headers/sysd-dirs-tmp
/ecos-c/CNAV/tmp2/crosstool-0.43/build/arm-9tdmi-linux-gnu/gcc-4.1.0-glibc-2.3.2/build-glibc-headers/sysd-dirs
make[1]: Leaving directory `/ecos-c/CNAV/tmp2/crosstool-0.43/build/arm-9tdmi-linux-gnu/gcc-4.1.0-glibc-2.3.2/glibc-2.3.2
'
make[1]: Entering directory `/ecos-c/CNAV/tmp2/crosstool-0.43/build/arm-9tdmi-linux-gnu/gcc-4.1.0-glibc-2.3.2/glibc-2.3.
2'
/ecos-c/CNAV/tmp2/crosstool-0.43/build/arm-9tdmi-linux-gnu/gcc-4.1.0-glibc-2.3.2/build-glibc-headers/sysd-syscalls:241:
*** missing separator.  Stop.
make[1]: Leaving directory `/ecos-c/CNAV/tmp2/crosstool-0.43/build/arm-9tdmi-linux-gnu/gcc-4.1.0-glibc-2.3.2/glibc-2.3.2
'
make: *** [sysdeps/gnu/errlist.c] Error 2

-------------------------------------- END ERROR OUTPUT -----------------------------------------

____________________________________________________________________________________ Looking for last minute shopping deals? Find them fast with Yahoo! Search. http://tools.search.yahoo.com/newsearch/category.php?category=shopping


--
For unsubscribe information see http://sourceware.org/lists.html#faq


Shot in the dark - the crosstool FAQ has an entry for Cygwin (see below).
In particular, I found the "mount -X" necessary.

HTH,
  Vin Shelton

Cygwin Crosstool, and probably gcc and glibc's configure scripts, assume that directory names do not contain any spaces. This is often violated on Windows. Please take care to not use directory names with spaces in them when running crosstool. It might work, but if it doesn't, you've been warned. (Same goes for Mac OS X.)

crosstool creates some really deeply nested directories while building, so filenames are quite long. This has two consequences:

First, on some versions of Windows, filenames (including directory) can't be longer than 240 chars. To avoid exceeding this limit, don't run crosstool in a directory with a long name.

Second, the maximum length of commandlines is extremely short. Since crosstool uses commandlines that include multiple filenames, they can exceed the limit very quickly. You can avoid this problem by using the "mount" command's options. e.g. mount /bin and /usr/bin with -X or "-o cygexec" (see the cygwin faq, and/or mount the crosstool directory with "-o managed" (see the cygwin doc for "mount").

Also, this isn't really a crosstool problem, but configuring linux-2.6 on cygwin may fail with the error

$ make menuconfig
 HOSTCC  scripts/basic/fixdep
 HOSTCC  scripts/basic/split-include
 HOSTCC  scripts/basic/docproc
 HOSTLD  scripts/kconfig/mconf
collect2: ld terminated with signal 11 [Segmentation fault], core dumped

A possible fix described e.g. by Bertrand Marquis' post of 29 June 2004 is to patch linux-2.6/scripts/kconfig/Makefile to just use libkconfig.o rather than first making a .so.

Cygwin-1.5.9-1 had a bug that prevents it from building glibc. You can work around this by updating to Cygwin-1.5.10-2.


--
For unsubscribe information see http://sourceware.org/lists.html#faq

References:
- Error building glibc-2.3.2 for my arm-9tdmi-linux cross compiler on cygwin
  - From: J Johnson

Index Nav:	[Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav:	[Date Prev] [Date Next]	[Thread Prev] [Thread Next]