[PATCH] sh3eb toolchain

["Robert P. J. Day" <rpjday at mindspring dot com>]

for following combination of components:

  BINUTILS_DIR=binutils-2.15.96
  GCC_DIR=gcc-4.1-20050327
  GLIBC_DIR=glibc-20050402
  LINUX_DIR=linux-2.6.8.1
  GLIBCTHREADS_FILENAME=glibc-linuxthreads-20050402

if someone wants to test this to make sure i didn't pooch anything
while bundling up the patch, that would be cool. :-)


================================================================


diff -Nru cr.orig/demo-sh3eb.sh crosstool-0.31/demo-sh3eb.sh
--- cr.orig/demo-sh3eb.sh	1969-12-31 19:00:00.000000000 -0500
+++ crosstool-0.31/demo-sh3eb.sh	2005-04-08 14:19:05.544268096 -0400
@@ -0,0 +1,26 @@
+#!/bin/sh
+set -ex
+TARBALLS_DIR=$HOME/downloads
+RESULT_TOP=/opt/crosstool
+export TARBALLS_DIR RESULT_TOP
+GCC_LANGUAGES="c,c++"
+export GCC_LANGUAGES
+
+# Really, you should do the mkdir before running this,
+# and chown /opt/crosstool to yourself so you don't need to run as root.
+mkdir -p $RESULT_TOP
+
+# sh3 support is untested... it is said to build, and "hello, world" works,
+# but that's all I've heard.
+# FIXME: The sh3 is supposedly the same as an sh4
+# but without the floating point unit, so maybe glibc has to be built
+# --without-fp.  See powerpc-405.dat and
+# http://www.gnu.org/software/libc/manual/html_node/Configuring-and-compiling.html#Configuring%20and%20compiling
+
+#eval `cat sh3.dat gcc-3.3.2-glibc-2.3.2.dat` sh all.sh --notest
+#eval `cat sh3.dat gcc-3.3.3-glibc-2.3.2.dat` sh all.sh --notest
+#eval `cat sh3.dat gcc-3.4.0-glibc-2.3.2.dat` sh all.sh --notest
+#eval `cat sh3.dat gcc-3.4.1-glibc-20040827.dat` sh all.sh --notest
+eval `cat sh3eb.dat gcc-4.1-20050327-glibc-20050402.dat` sh all.sh --notest
+
+echo Done.
diff -Nru cr.orig/gcc-4.1-20050327-glibc-20050402.dat crosstool-0.31/gcc-4.1-20050327-glibc-20050402.dat
--- cr.orig/gcc-4.1-20050327-glibc-20050402.dat	1969-12-31 19:00:00.000000000 -0500
+++ crosstool-0.31/gcc-4.1-20050327-glibc-20050402.dat	2005-04-08 14:20:15.201678560 -0400
@@ -0,0 +1,6 @@
+BINUTILS_DIR=binutils-2.15.96
+GCC_DIR=gcc-4.1-20050327
+GLIBC_DIR=glibc-20050402
+LINUX_DIR=linux-2.6.8.1
+GLIBCTHREADS_FILENAME=glibc-linuxthreads-20050402
+EXTRA_TARGET_CFLAGS="-fno-unit-at-a-time"
diff -Nru cr.orig/patches/glibc-20050402/make-install-lib-all.patch crosstool-0.31/patches/glibc-20050402/make-install-lib-all.patch
--- cr.orig/patches/glibc-20050402/make-install-lib-all.patch	1969-12-31 19:00:00.000000000 -0500
+++ crosstool-0.31/patches/glibc-20050402/make-install-lib-all.patch	2005-04-08 14:15:06.417620872 -0400
@@ -0,0 +1,24 @@
+From http://svn.exactcode.de/t2/trunk/package/base/glibc32/make-install-lib-all.patch
+Rule to install all needed libraries, not just the ones installed by install-lib,
+yet not install programs.
+Needed because we can't use the main install target, as we can't build programs before
+we have the final gcc installed; linking fails because libeh.a is not present,
+and glibc insists on linking programs with that library.
+
+diff -Naur glibc-2.3.4.orig/Makerules glibc-2.3.4/Makerules
+--- glibc-2.3.4.orig/Makerules	2004-12-15 20:52:39.000000000 +0200
++++ glibc-2.3.4/Makerules	2005-02-19 15:16:31.415125176 +0200
+@@ -844,6 +844,13 @@
+ installed-libcs := $(foreach o,$(filter-out .os,$(object-suffixes-for-libc)),\
+ 			     $(inst_libdir)/$(patsubst %,$(libtype$o),\
+ 						     $(libprefix)$(libc-name)))
++
++install-lib-all: $(inst_slibdir)/libc.so$(libc.so-version) \
++		$(inst_slibdir)/libc-$(version).so \
++		$(inst_libdir)/libc.so \
++		$(inst_libdir)/libc.a \
++		install-lib
++
+ install: $(installed-libcs)
+ $(installed-libcs): $(inst_libdir)/lib$(libprefix)%: lib $(+force)
+ 	$(make-target-directory)
diff -Nru cr.orig/patches/linux-2.6.8.1/kaz-types.patch crosstool-0.31/patches/linux-2.6.8.1/kaz-types.patch
--- cr.orig/patches/linux-2.6.8.1/kaz-types.patch	1969-12-31 19:00:00.000000000 -0500
+++ crosstool-0.31/patches/linux-2.6.8.1/kaz-types.patch	2005-04-08 14:14:49.349215664 -0400
@@ -0,0 +1,60 @@
+The following fixes an error that occurs when building glibc-2.3.2 (but not glibc-2.2.5) for sh4:
+
+In file included from sys/ustat.h:30,
+                 from ../sysdeps/unix/sysv/linux/ustat.c:21:
+../sysdeps/generic/bits/ustat.h:26: error: redefinition of `struct ustat'
+make[2]: *** [/home3/dank/crosstool-0.7/build/sh4-unknown-linux-gnu/gcc-3.3-glibc-2.3.2/build-glibc/misc/ustat.o] Error 1
+make[2]: Leaving directory `/home3/dank/crosstool-0.7/build/sh4-unknown-linux-gnu/gcc-3.3-glibc-2.3.2/glibc-2.3.2/misc'
+make[1]: *** [misc/subdir_lib] Error 2
+make[1]: Leaving directory `/home3/dank/crosstool-0.7/build/sh4-unknown-linux-gnu/gcc-3.3-glibc-2.3.2/glibc-2.3.2'
+make: *** [all] Error 2
+
+----------- snip ---------------
+
+Date: Fri, 06 Jun 2003 08:00:00 +0900
+From: kaz Kojima <kkojima@rr.iij4u.or.jp>
+Subject: [linux-sh:02770] Re: Compiling glibc-2.3.2 for sh4 fails with "include/asm/user.h:32:
+ error: redefinition of `struct user_fpu_struct'"
+To: linux-sh@m17n.org
+Message-Id: <200306052250.h55Moeb08707@r-rr.iij4u.or.jp>
+
+Hi,
+
+Dan Kegel <dank@kegel.com> wrote:
+> When I try to build glibc-2.3.2 for sh4, it fails with the error
+[snip]
+> /home3/dank/crosstool-0.3/result/sh4-linux/gcc-3.3-glibc-2.3.2/sh4-linux/include/asm/user.h:32: error: redefinition of `struct user_fpu_struct'
+> /home3/dank/crosstool-0.3/result/sh4-linux/gcc-3.3-glibc-2.3.2/sh4-linux/include/asm/user.h:39: error: redefinition of `struct user'
+[snip]
+> The error reminds me of the kind of thing fixed by
+> http://www.kegel.com/crossgcc/crosstool-0.4/glibc-2.3.2-patches/sh-user.patch
+
+It seems that the definitions in asm/user.h and the above patch collide.
+I'm not sure why you need this patch, but is it needed for the problem
+about struct ustat that you pointed out in this list, isn't it?
+I found why I don't hit ustat problem - my local kernel tree includes
+the following patch, though I can't recall about it.
+
+Regards,
+	kaz
+--
+diff -u linux-2.5.69-sf-orig/include/linux/types.h /usr/local/sh4-unknown-linux-gnu/include/linux/types.h
+--- linux-2.5.69-sf-orig/include/linux/types.h	Wed Mar  5 12:29:34 2003
++++ sh4-unknown-linux-gnu/include/linux/types.h	Sat Apr 19 10:05:52 2003
+@@ -141,6 +141,7 @@
+
+ #endif /* __KERNEL_STRICT_NAMES */
+
++#ifdef	__KERNEL__
+ /*
+  * Below are truly Linux-specific types that should never collide with
+  * any application/library that wants linux/types.h.
+@@ -152,5 +153,6 @@
+ 	char			f_fname[6];
+ 	char			f_fpack[6];
+ };
++#endif
+
+ #endif /* _LINUX_TYPES_H */
+
+
diff -Nru cr.orig/sh3eb.config crosstool-0.31/sh3eb.config
--- cr.orig/sh3eb.config	1969-12-31 19:00:00.000000000 -0500
+++ crosstool-0.31/sh3eb.config	2005-04-08 14:15:56.607990776 -0400
@@ -0,0 +1,683 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.11.6
+# Fri Apr  1 12:33:11 2005
+#
+CONFIG_SUPERH=y
+CONFIG_UID16=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+
+#
+# System type
+#
+# CONFIG_SH_SOLUTION_ENGINE is not set
+# CONFIG_SH_7751_SOLUTION_ENGINE is not set
+# CONFIG_SH_7300_SOLUTION_ENGINE is not set
+# CONFIG_SH_73180_SOLUTION_ENGINE is not set
+# CONFIG_SH_7751_SYSTEMH is not set
+# CONFIG_SH_STB1_HARP is not set
+# CONFIG_SH_STB1_OVERDRIVE is not set
+# CONFIG_SH_HP620 is not set
+# CONFIG_SH_HP680 is not set
+CONFIG_SH_HP690=y
+# CONFIG_SH_CQREEK is not set
+# CONFIG_SH_DMIDA is not set
+# CONFIG_SH_EC3104 is not set
+# CONFIG_SH_SATURN is not set
+# CONFIG_SH_DREAMCAST is not set
+# CONFIG_SH_CAT68701 is not set
+# CONFIG_SH_BIGSUR is not set
+# CONFIG_SH_SH2000 is not set
+# CONFIG_SH_ADX is not set
+# CONFIG_SH_MPC1211 is not set
+# CONFIG_SH_SH03 is not set
+# CONFIG_SH_SECUREEDGE5410 is not set
+# CONFIG_SH_HS7751RVOIP is not set
+# CONFIG_SH_RTS7751R2D is not set
+# CONFIG_SH_EDOSK7705 is not set
+# CONFIG_SH_SH4202_MICRODEV is not set
+# CONFIG_SH_UNKNOWN is not set
+# CONFIG_CPU_SH2 is not set
+CONFIG_CPU_SH3=y
+# CONFIG_CPU_SH4 is not set
+# CONFIG_CPU_SUBTYPE_SH7604 is not set
+# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+CONFIG_CPU_SUBTYPE_SH7709=y
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
+# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+CONFIG_MMU=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_MEMORY_SIZE=0x00400000
+CONFIG_MEMORY_SET=y
+# CONFIG_MEMORY_OVERRIDE is not set
+CONFIG_SH_RTC=y
+# CONFIG_SH_DSP is not set
+CONFIG_SH_ADC=y
+CONFIG_SH_HP600=y
+CONFIG_DISCONTIGMEM=y
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=00210000
+# CONFIG_CPU_LITTLE_ENDIAN is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_UBC_WAKEUP is not set
+# CONFIG_SH_WRITETHROUGH is not set
+# CONFIG_SH_OCRAM is not set
+# CONFIG_SMP is not set
+CONFIG_SH_PCLK_CALC=y
+CONFIG_SH_PCLK_FREQ=0
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+# CONFIG_HD6446X_SERIES is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_PCI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PC-card bridges
+#
+
+#
+# PCI Hotplug Support
+#
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_FLAT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# SH initrd options
+#
+# CONFIG_EMBEDDED_RAMDISK is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_LBD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Networking support
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=m
+CONFIG_PACKET_MMAP=y
+# CONFIG_NETLINK_DEV is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+# CONFIG_IP_ROUTE_VERBOSE is not set
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_IP_TCPDIAG=y
+CONFIG_IP_TCPDIAG_IPV6=y
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_NETFILTER is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+# CONFIG_NET_ETHERNET is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input I/O drivers
+#
+# CONFIG_GAMEPORT is not set
+CONFIG_SOUND_GAMEPORT=y
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_CT82C710 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_SH_SCI is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_JBD is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+
+#
+# XFS support
+#
+# CONFIG_XFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_ROMFS_FS is not set
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_SYSFS=y
+# CONFIG_DEVFS_FS is not set
+# CONFIG_DEVPTS_FS_XATTR is not set
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_XATTR is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_FRAME_POINTER is not set
+# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_KGDB is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC32 is not set
+# CONFIG_LIBCRC32C is not set
diff -Nru cr.orig/sh3eb.dat crosstool-0.31/sh3eb.dat
--- cr.orig/sh3eb.dat	1969-12-31 19:00:00.000000000 -0500
+++ crosstool-0.31/sh3eb.dat	2005-04-08 14:21:31.063145864 -0400
@@ -0,0 +1,4 @@
+KERNELCONFIG=`pwd`/sh3eb.config
+TARGET=sh3eb-unknown-linux-gnu
+TARGET_CFLAGS="-O -mb -m3"
+GLIBC_CONFIGPARMS="no-z-defs=yes"


------
Want more information?  See the CrossGCC FAQ, http://www.objsw.com/CrossGCC/
Want to unsubscribe? Send a note to crossgcc-unsubscribe@sources.redhat.com