RE: Problem with "make ARCH=ppc64 oldconfig"

["Asaf Levy" <asafl at marvell dot com>]

$ make V=1 ARCH=ppc64 oldconfig
make -f scripts/Makefile.build obj=scripts/basic
  gcc -Wp,-MD,scripts/basic/.fixdep.d -Wall -Wstrict-prototypes -O2
-fomit-frame-pointer        -o scripts/basic/fixdep scrip
ts/basic/fixdep.c
fixdep:
: No such file or directory
make[1]: *** [scripts/basic/fixdep] Error 2
make: *** [scripts_basic] Error 2


-----Original Message-----
From: crossgcc-owner@sources.redhat.com
[mailto:crossgcc-owner@sources.redhat.com] On Behalf Of Dan Kegel
Sent: Wednesday, February 23, 2005 17:15
To: crossgcc
Subject: Problem with "make ARCH=ppc64 oldconfig"

Hi Asaf,
try running
   cd
/Home/crosstool-0.28-rc37/build/powerpc64-unknown-linux-gnu/gcc-3.4.2-gl
ibc-2.3.3/linux-2.6.8
   make V=1 ARCH=ppc64 oldconfig
and let's see exactly what it's trying to do.
- Dan

-------- Original Message --------
Subject: RE: Qeustion regarding crosstool
Date: Wed, 23 Feb 2005 17:40:15 +0200
From: Asaf Levy <asafl@marvell.com>
To: Dan Kegel <dank@kegel.com>

Thanks for the quick response.
I do use the version you mentioned below (0.28-rc37) and I get the
following error message:

+
BINUTILS_SYSROOT_ARG=--with-sysroot=/opt/crosstool/powerpc64-unknown-lin
ux-gnu/gcc-3.4.2-glibc-2.3.3/powerpc64-unknown-linux-gnu/sys-root
+
GCC_SYSROOT_ARG=--with-sysroot=/opt/crosstool/powerpc64-unknown-linux-gn
u/gcc-3.4.2-glibc-2.3.3/powerpc64-unknown-linux-gnu/sys-root
+
GCC_SYSROOT_ARG_CORE=--with-sysroot=/opt/crosstool/powerpc64-unknown-lin
ux-gnu/gcc-3.4.2-glibc-2.3.3/powerpc64-unknown-linux-gnu/sys-root
+ GLIBC_SYSROOT_ARG=
+ mkdir -p
/opt/crosstool/powerpc64-unknown-linux-gnu/gcc-3.4.2-glibc-2.3.3/powerpc
64-unknown-linux-gnu/sys-root/lib
+ mkdir -p
/opt/crosstool/powerpc64-unknown-linux-gnu/gcc-3.4.2-glibc-2.3.3/powerpc
64-unknown-linux-gnu/sys-root/usr/lib
+ echo
+ echo Building for --target=powerpc64-unknown-linux-gnu,
--prefix=/opt/crosstool/powerpc64-unknown-linux-gnu/gcc-3.4.2-glibc-2.3.
3
Building for --target=powerpc64-unknown-linux-gnu,
--prefix=/opt/crosstool/powerpc64-unknown-linux-gnu/gcc-3.4.2-glibc-2.3.
3
+ echo Prepare kernel headers
Prepare kernel headers
+ cd
/Home/crosstool-0.28-rc37/build/powerpc64-unknown-linux-gnu/gcc-3.4.2-gl
ibc-2.3.3/linux-2.6.8
+ test -f /Home/crosstool-0.28-rc37/powerpc64.config
+ cp /Home/crosstool-0.28-rc37/powerpc64.config .config
+ test -f .config
+ yes
+ make ARCH=ppc64 oldconfig
   HOSTCC  scripts/basic/fixdep
fixdep:
: No such file or directory
make[1]: *** [scripts/basic/fixdep] Error 2
make: *** [scripts_basic] Error 2


Looks like it is trying to execute 'fixdep' with no success.
Any idea how the get over it?



-----Original Message-----
From: Dan Kegel [mailto:dank@kegel.com]
Sent: Wednesday, February 23, 2005 16:04
To: Asaf Levy
Subject: Re: Qeustion regarding crosstool

Asaf Levy wrote:
> I'm using Cygwin under WinXP and I cross-compile programs that are 
> executed on an embedded system with powerpc64 (970).
> 
> 1) Can I use crosstool-0.28 (or other) to build a cross compiler 
> (ppc970) that will run on cygwin (Pentium) and produce output for 
> powerpc64-ibm-linux CPU?

Yes.  (Use 0.28-rc37, the latest rc.)

> 2) Do I have to change any of the scripts inside the cross-tool
tarball
> to satisfy the cross-tool build on cygwin?

I don't think so.
If you run into trouble, post to the crossgcc
<crossgcc@sources.redhat.com> mailing list,
as I might be offline.  Be warned that all future emails from you
to me may be forwarded to that list.
- Dan

-- 
Trying to get a job as a c++ developer?  See
http://kegel.com/academy/getting-hired.html



-- 
Trying to get a job as a c++ developer?  See
http://kegel.com/academy/getting-hired.html

------
Want more information?  See the CrossGCC FAQ,
http://www.objsw.com/CrossGCC/
Want to unsubscribe? Send a note to
crossgcc-unsubscribe@sources.redhat.com


------
Want more information?  See the CrossGCC FAQ, http://www.objsw.com/CrossGCC/
Want to unsubscribe? Send a note to crossgcc-unsubscribe@sources.redhat.com