crosstool-0.28-rc37 fails to build on SuSE 9.2

[Steven Scholz <steven dot scholz at imc-berlin dot de>]

Hi there,

I just tried to build an ARM cross tool chain using crosstool-0.28-rc37

+ export KERNELCONFIG=/home/scholz/crosstool-0.28-rc37/arm.config
+ KERNELCONFIG=/home/scholz/crosstool-0.28-rc37/arm.config
+ export TARGET=arm-softfloat-linux-gnu
+ TARGET=arm-softfloat-linux-gnu
+ export TARGET_CFLAGS=-O
+ TARGET_CFLAGS=-O
+ export GCC_EXTRA_CONFIG=--with-float=soft
+ GCC_EXTRA_CONFIG=--with-float=soft
+ export GLIBC_EXTRA_CONFIG=--without-fp
+ GLIBC_EXTRA_CONFIG=--without-fp
+ export BINUTILS_DIR=binutils-2.15
+ BINUTILS_DIR=binutils-2.15
+ export GCC_DIR=gcc-3.3.3
+ GCC_DIR=gcc-3.3.3
+ export GLIBC_DIR=glibc-2.3.2
+ GLIBC_DIR=glibc-2.3.2
+ export LINUX_DIR=linux-2.6.8
+ LINUX_DIR=linux-2.6.8
+ export GLIBCTHREADS_FILENAME=glibc-linuxthreads-2.3.2
+ GLIBCTHREADS_FILENAME=glibc-linuxthreads-2.3.2

but building glibc fails on my Linux SuSE 9.2!

+ cd ..
+ echo 'Build gcc-core (just enough to build glibc)'
Build gcc-core (just enough to build glibc)
+ mkdir -p build-gcc-core
+ cd build-gcc-core
+ test '!' -f Makefile
+ /home/scholz/crosstool-0.28-rc37/build/arm-softfloat-linux-gnu/gcc-3.3.3-glibc-2.3.2-linux-2.6.8/gcc-3.3.3/confi
gure --target=arm-softfloat-linux-gnu --host=i686-host_pc-linux-gnu --prefix=/opt/crosstool/arm-softfloat-linux-gn
u/gcc-3.3.3-glibc-2.3.2-linux-2.6.8 --with-local-prefix=/opt/crosstool/arm-softfloat-linux-gnu/gcc-3.3.3-glibc-2.3
.2-linux-2.6.8/arm-softfloat-linux-gnu --disable-multilib --with-newlib --with-float=soft --without-headers --disa
ble-nls --enable-threads=no --enable-symvers=gnu --enable-__cxa_atexit --enable-languages=c --disable-shared
*** This configuration is not supported in the following subdirectories:
     target-libstdc++-v3 target-libf2c target-libffi target-boehm-gc target-zlib target-libjava zlib fastjar targe
t-libobjc
    (Any other directories should still work fine.)
Copying no to /opt/crosstool/arm-softfloat-linux-gnu/gcc-3.3.3-glibc-2.3.2-linux-2.6.8/arm-softfloat-linux-gnu/sys
-include
/tmp/cNf20505/cNf20505.tgt: line 821: cd: no: No such file or directory
Created "Makefile" in /home/scholz/crosstool-0.28-rc37/build/arm-softfloat-linux-gnu/gcc-3.3.3-glibc-2.3.2-linux-2
.6.8/build-gcc-core using "mt-frag"
Configuring libiberty...
creating cache ../config.cache
... <snip> ...
checking linker read-only and read-write section mixing... read-write
checking linker PT_GNU_EH_FRAME support... yes
Using ggc-page for garbage collection.
checking whether to enable maintainer-specific portions of Makefiles... no
Links are now set up to build a cross-compiler for arm-softfloat-linux-gnu
  from i686-host_pc-linux-gnu.
updating cache ../config.cache
creating ./config.status
creating Makefile
creating intl/Makefile
creating fixinc/Makefile
creating gccbug
creating mklibgcc
creating mkheaders
creating auto-host.h
trap: usage: trap [-lp] [[arg] signal_spec ...]

I have no idea why is is just stopping here!
SuSE 9.2 has
- automake (GNU automake) 1.9.1
- autoconf (GNU Autoconf) 2.59
- GNU Make 3.80

Thanks a million!!!

--
Steven

------
Want more information?  See the CrossGCC FAQ, http://www.objsw.com/CrossGCC/
Want to unsubscribe? Send a note to crossgcc-unsubscribe@sources.redhat.com