This is the mail archive of the crossgcc@sources.redhat.com mailing list for the crossgcc project.

See the CrossGCC FAQ for lots more information.

Index Nav:	[Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav:	[Date Prev] [Date Next]	[Thread Prev] [Thread Next]

Re: How to make a portable toolchain?

To: <kai dot ruottu at luukku dot com>
Subject: Re: How to make a portable toolchain?
From: "Bin Zhou" <binzhou at pop-star dot net dot cn>
Date: Tue, 6 Nov 2001 19:38:10 -0800
Cc: "Rodney Smith" <rodney dot smith at watchguard dot com>,<crossgcc at sourceware dot cygnus dot com>,<binzhou at tgivan dot com>
References: <12838094a2cf36719d6757258cc8b69b3be04fd5@watchguard.com> <20011101042233.A13266@0xd6.org> <32756538.1004661998178.JavaMail.hip-pop@porkkana> <3A016BD5.39B87590@luukku.com> <20122146.1004956307299.JavaMail.hip-pop@porkkana> <3A0552EC.1FA7A18A@luukku.com> <17405147.1005038268422.JavaMail.hip-pop@porkkana> <3BE7B9CF.83E97C64@luukku.com>

Hi Kai,

>  Ok, my new suggestion would however to be to add the following:
>
>    %{static:-Bdynamic -ldl -Bstatic} %{!static:-ldl}
>
> after the '-lc' in the '*lib:'-spec in the 'specs'-file (The old one
suggested only
> the latter part)... Then the '-ldl' will be 'wrapped' between '-Bdynamic'
and
> '-Bstatic' on the command line for the linker.
>

This works. "objdump -p" shows that my target only needs the libdl.so.1 at
running time.
Thanks a lot.

-Bin



------
Want more information?  See the CrossGCC FAQ, http://www.objsw.com/CrossGCC/
Want to unsubscribe? Send a note to crossgcc-unsubscribe@sourceware.cygnus.com

References:
- Re: How to make a portable toolchain?
  - From: M. R. Brown
- Re: How to make a portable toolchain?
  - From: Kai Ruottu
- Re: How to make a portable toolchain?
  - From: Kai Ruottu
- Re: How to make a portable toolchain?
  - From: Kai Ruottu

Index Nav:	[Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav:	[Date Prev] [Date Next]	[Thread Prev] [Thread Next]