Re: arm cross error

[nhat dot dao at philips dot com]

maybe, that can help you :
??
www.objsw.com/docs/gcc_51.html

/pegase

dkorn@pixelpower.com a écrit :

> >-----Original Message-----
> >From: Cristian Amitroaie [mailto:Cristian.Amitroaie@nobugconsulting.ro]
> >Sent: 15 March 2001 09:03
>
> >how can I pass over this error?
> >
> >--------------------------------------------------------------
> >
> >  if [ $? -eq 0 ] ; then true; else exit 1; fi; \
> >  mv libgcc1.o ${name}.o; \
> >  arm-coff-ar rc tmplibgcc1.a ${name}.o; \
> >  rm -f ${name}.o; \
> >done
> >_udivsi3
> >/bin/sh: arm-coff-ar: command not found
> >_divsi3
> >/bin/sh: arm-coff-ar: command not found
> >_umodsi3
> >/bin/sh: arm-coff-ar: command not found
> >_modsi3
> >/bin/sh: arm-coff-ar: command not found
> >_dvmd_tls
> >/bin/sh: arm-coff-ar: command not found
> >rm -f libgcc1.S
> >mv tmplibgcc1.a libgcc1-asm.a
> >mv: tmplibgcc1.a: No such file or directory
> >make[1]: *** [libgcc1-asm.a] Error 1
> >make[1]: Leaving directory `/home/Cristian/b-gcc/gcc'
> >make: *** [all-gcc] Error 2
> >
> >----------------------------------------------------------
> >
> >target=arm-coff
>
>   The compile process is trying to build libgcc for the arm target.  It
> needs the arm cross binutils to do so, but for some reason it can't find
> the cross ar utility.  There are two possible reasons for this: either
> you didn't build and install the cross binutils yet, or you built and
> installed them with a different --prefix setting from the one you're
> using to build Gcc.  It's an unfortunate (because it could be worked around,
> but hasn't yet) requirement of building Gcc that you use the same prefix
> settings for the binutils as for the compiler.
>
>   If that isn't the problem, perhaps your path setting doesn't include
> the path to the install directory for the cross binutils - $prefix/bin
> should be on your path (and $prefix/arm-coff/bin must *not* be).
>
>       DaveK
> --
>  All your base are belong to us!
>
> **********************************************************************
> This email and any files transmitted with it are confidential and
> intended solely for the use of the individual or entity to whom they
> are addressed. If you have received this email in error please notify
> the system manager.
>
> This footnote also confirms that this email message has been swept by
> MIMEsweeper for the presence of computer viruses.
>
> www.mimesweeper.com
> **********************************************************************
>
> ------
> Want more information?  See the CrossGCC FAQ, http://www.objsw.com/CrossGCC/
> Want to unsubscribe? Send a note to crossgcc-unsubscribe@sourceware.cygnus.com


------
Want more information?  See the CrossGCC FAQ, http://www.objsw.com/CrossGCC/
Want to unsubscribe? Send a note to crossgcc-unsubscribe@sourceware.cygnus.com