This is the mail archive of the
mailing list for the crossgcc project.
Re: remote gdb with shared serial port
- To: firstname.lastname@example.org
- Subject: Re: remote gdb with shared serial port
- From: "D.F.S." <email@example.com>
- Date: Fri, 6 Aug 1999 08:45:31 -0600 (MDT)
- Reply-To: firstname.lastname@example.org
> The box is plugged into the serial port of an NCD X-terminal, so the
> host computer must communicate with the serial port via a socket, such
> as a telnet connection.
Somewhat off subject as to Cross compilers, but related to embedded systems.
How is this setup handled?
I Need to build an RS-485-Ethernet Gateway
I also have some older Ethernet Routers and a new ISDN router which only
configure thru a serial port.
Being able to telnet to them from anywhere on the network would be great.
I already have a bunch of older NCD X-terms.
Yank the base off the CRT and stuff it in a closet someplace.
The rs-232 to 485 is not an issue.
This may be a perfect way to save work and use hardware I already have.
New CrossGCC FAQ: http://www.objsw.com/CrossGCC
To remove yourself from the crossgcc list, send
mail to email@example.com with the
text 'unsubscribe' (without the quotes) in the
body of the message.