This is the mail archive of the
binutils@sourceware.org
mailing list for the binutils project.
Re: [Patch 0/2] [binutils][arm] Armv8-M Custom Datapath Extension.
On Mon, 10 Feb 2020 at 16:11, Nick Clifton <nickc@redhat.com> wrote:
>
> Hi Matthew,
>
> > The patch is in two parts:
> > Part 1 enables the scalar instructions, which are predicated on *either*
> > Armv8-m with the floating point extension *or* Armv8.1-m with the MVE
> > extension.
> >
> > Part 2 enables the vector instructions which are dependent on Armv8.1-m with
> > MVE.
> >
> > Part 1 was worked on by both me and Stam Markianos-Wright.
> >
> > The patch series has been successfully regression tested on arm-none-eabi and
> > arm-wince-pe.
> >
> > Ok for master?
>
> Yes - please apply.
>
Hi,
One of these two patches causes a build failure for gas. I'm seeing:
../../gas/config/tc-arm.c: In function ‘vcx_handle_register_arguments’:
../../gas/config/tc-arm.c:21985:3: error: ‘for’ loop initial
declarations are only allowed in C99 mode
for (unsigned i = 0; i < num_registers; i++)
^
../../gas/config/tc-arm.c:21985:3: note: use option -std=c99 or
-std=gnu99 to compile your code
make[4]: *** [config/tc-arm.o] Error 1
Can you fix it?
Thanks
Christophe
> Cheers
> Nick
>
>