This is the mail archive of the binutils@sourceware.org mailing list for the binutils project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re: [PATCH] config: fix AM_ICONV for in-tree libiconv


On Wed, 2015-07-01 at 15:52 -0500, Yaakov Selkowitz wrote:
> On Wed, 2015-07-01 at 15:46 -0500, Yaakov Selkowitz wrote:
> > On Fri, 2015-05-29 at 16:25 -0500, Yaakov Selkowitz wrote:
> > > This is the second in a series of patches to make a build with an
> > > in-tree GNU libiconv work as designed.
> > > 
> > > Currently GDB is the only toolchain component which actually uses an
> > > in-tree libiconv.  This patch modifies the common AM_ICONV to use an
> > > in-tree libiconv when present and not already provided by libc.  (GDB's
> > > workaround uses an in-tree libiconv even when libc provides iconv(3);
> > > I'm not sure when or why that would be desirable.)
> > > 
> > > Once these two patches are merged in to each tree, I will follow with
> > > patches to regenerate the various configure scripts and a few other
> > > minor corresponding changes.
> > 
> > This patch was bootstrapped in conjunction with the toplevel libiconv
> > patch.  I don't have write permissions to either repository, so please
> > apply once approved.
> 
> Ditto for this patch, which regenerates intl/configure for the changes
> in config/iconv.m4.

With the patch attached this time.

-- 
Yaakov Selkowitz
Associate Software Engineer, ARM
Red Hat, Inc.

Index: intl/configure
===================================================================
--- intl/configure	(revision 225215)
+++ intl/configure	(working copy)
@@ -609,8 +609,6 @@
 USE_INCLUDED_LIBINTL
 BUILD_INCLUDED_LIBINTL
 INTLBISON
-LTLIBICONV
-LIBICONV
 GLIBC21
 ALLOCA
 EGREP
@@ -684,9 +682,9 @@
 ac_user_opts='
 enable_option_checking
 enable_nls
+with_libiconv_prefix
 with_gnu_ld
 enable_rpath
-with_libiconv_prefix
 with_included_gettext
 with_libintl_prefix
 enable_maintainer_mode
@@ -1319,9 +1317,9 @@
 Optional Packages:
   --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
   --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
+  --with-libiconv-prefix=DIR
+                          search for libiconv in DIR/include and DIR/lib
   --with-gnu-ld           assume the C compiler uses GNU ld default=no
-  --with-libiconv-prefix[=DIR]  search for libiconv in DIR/include and DIR/lib
-  --without-libiconv-prefix     don't search for libiconv in includedir and libdir
   --with-included-gettext use the GNU gettext library included here
   --with-libintl-prefix[=DIR]  search for libintl in DIR/include and DIR/lib
   --without-libintl-prefix     don't search for libintl in includedir and libdir
@@ -4849,548 +4847,7 @@
   fi
 
 
-      if test "X$prefix" = "XNONE"; then
-    acl_final_prefix="$ac_default_prefix"
-  else
-    acl_final_prefix="$prefix"
-  fi
-  if test "X$exec_prefix" = "XNONE"; then
-    acl_final_exec_prefix='${prefix}'
-  else
-    acl_final_exec_prefix="$exec_prefix"
-  fi
-  acl_save_prefix="$prefix"
-  prefix="$acl_final_prefix"
-  eval acl_final_exec_prefix=\"$acl_final_exec_prefix\"
-  prefix="$acl_save_prefix"
 
-
-# Check whether --with-gnu-ld was given.
-if test "${with_gnu_ld+set}" = set; then :
-  withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
-else
-  with_gnu_ld=no
-fi
-
-# Prepare PATH_SEPARATOR.
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  echo "#! /bin/sh" >conf$$.sh
-  echo  "exit 0"   >>conf$$.sh
-  chmod +x conf$$.sh
-  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-    PATH_SEPARATOR=';'
-  else
-    PATH_SEPARATOR=:
-  fi
-  rm -f conf$$.sh
-fi
-ac_prog=ld
-if test "$GCC" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by GCC" >&5
-$as_echo_n "checking for ld used by GCC... " >&6; }
-  case $host in
-  *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
-    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-  *)
-    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-  esac
-  case $ac_prog in
-    # Accept absolute paths.
-    [\\/]* | [A-Za-z]:[\\/]*)
-      re_direlt='/[^/][^/]*/\.\./'
-      # Canonicalize the path of ld
-      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
-    ;;
-  *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
-    ;;
-  esac
-elif test "$with_gnu_ld" = yes; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
-$as_echo_n "checking for GNU ld... " >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
-$as_echo_n "checking for non-GNU ld... " >&6; }
-fi
-if test "${acl_cv_path_LD+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -z "$LD"; then
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      acl_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some GNU ld's only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      if "$acl_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
-	test "$with_gnu_ld" != no && break
-      else
-	test "$with_gnu_ld" != yes && break
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-else
-  acl_cv_path_LD="$LD" # Let the user override the test with a path.
-fi
-fi
-
-LD="$acl_cv_path_LD"
-if test -n "$LD"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
-$as_echo "$LD" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-test -z "$LD" && as_fn_error "no acceptable ld found in \$PATH" "$LINENO" 5
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
-$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
-if test "${acl_cv_prog_gnu_ld+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  # I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
-  acl_cv_prog_gnu_ld=yes
-else
-  acl_cv_prog_gnu_ld=no
-fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_prog_gnu_ld" >&5
-$as_echo "$acl_cv_prog_gnu_ld" >&6; }
-with_gnu_ld=$acl_cv_prog_gnu_ld
-
-
-
-                                                { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shared library run path origin" >&5
-$as_echo_n "checking for shared library run path origin... " >&6; }
-if test "${acl_cv_rpath+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-
-    CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \
-    ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh
-    . ./conftest.sh
-    rm -f ./conftest.sh
-    acl_cv_rpath=done
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_rpath" >&5
-$as_echo "$acl_cv_rpath" >&6; }
-  wl="$acl_cv_wl"
-  libext="$acl_cv_libext"
-  shlibext="$acl_cv_shlibext"
-  hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
-  hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
-  hardcode_direct="$acl_cv_hardcode_direct"
-  hardcode_minus_L="$acl_cv_hardcode_minus_L"
-    # Check whether --enable-rpath was given.
-if test "${enable_rpath+set}" = set; then :
-  enableval=$enable_rpath; :
-else
-  enable_rpath=yes
-fi
-
-
-
-
-
-
-
-
-    use_additional=yes
-
-  acl_save_prefix="$prefix"
-  prefix="$acl_final_prefix"
-  acl_save_exec_prefix="$exec_prefix"
-  exec_prefix="$acl_final_exec_prefix"
-
-    eval additional_includedir=\"$includedir\"
-    eval additional_libdir=\"$libdir\"
-
-  exec_prefix="$acl_save_exec_prefix"
-  prefix="$acl_save_prefix"
-
-
-# Check whether --with-libiconv-prefix was given.
-if test "${with_libiconv_prefix+set}" = set; then :
-  withval=$with_libiconv_prefix;
-    if test "X$withval" = "Xno"; then
-      use_additional=no
-    else
-      if test "X$withval" = "X"; then
-
-  acl_save_prefix="$prefix"
-  prefix="$acl_final_prefix"
-  acl_save_exec_prefix="$exec_prefix"
-  exec_prefix="$acl_final_exec_prefix"
-
-          eval additional_includedir=\"$includedir\"
-          eval additional_libdir=\"$libdir\"
-
-  exec_prefix="$acl_save_exec_prefix"
-  prefix="$acl_save_prefix"
-
-      else
-        additional_includedir="$withval/include"
-        additional_libdir="$withval/lib"
-      fi
-    fi
-
-fi
-
-      LIBICONV=
-  LTLIBICONV=
-  INCICONV=
-  rpathdirs=
-  ltrpathdirs=
-  names_already_handled=
-  names_next_round='iconv '
-  while test -n "$names_next_round"; do
-    names_this_round="$names_next_round"
-    names_next_round=
-    for name in $names_this_round; do
-      already_handled=
-      for n in $names_already_handled; do
-        if test "$n" = "$name"; then
-          already_handled=yes
-          break
-        fi
-      done
-      if test -z "$already_handled"; then
-        names_already_handled="$names_already_handled $name"
-                        uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'`
-        eval value=\"\$HAVE_LIB$uppername\"
-        if test -n "$value"; then
-          if test "$value" = yes; then
-            eval value=\"\$LIB$uppername\"
-            test -z "$value" || LIBICONV="${LIBICONV}${LIBICONV:+ }$value"
-            eval value=\"\$LTLIB$uppername\"
-            test -z "$value" || LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$value"
-          else
-                                    :
-          fi
-        else
-                              found_dir=
-          found_la=
-          found_so=
-          found_a=
-          if test $use_additional = yes; then
-            if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then
-              found_dir="$additional_libdir"
-              found_so="$additional_libdir/lib$name.$shlibext"
-              if test -f "$additional_libdir/lib$name.la"; then
-                found_la="$additional_libdir/lib$name.la"
-              fi
-            else
-              if test -f "$additional_libdir/lib$name.$libext"; then
-                found_dir="$additional_libdir"
-                found_a="$additional_libdir/lib$name.$libext"
-                if test -f "$additional_libdir/lib$name.la"; then
-                  found_la="$additional_libdir/lib$name.la"
-                fi
-              fi
-            fi
-          fi
-          if test "X$found_dir" = "X"; then
-            for x in $LDFLAGS $LTLIBICONV; do
-
-  acl_save_prefix="$prefix"
-  prefix="$acl_final_prefix"
-  acl_save_exec_prefix="$exec_prefix"
-  exec_prefix="$acl_final_exec_prefix"
-  eval x=\"$x\"
-  exec_prefix="$acl_save_exec_prefix"
-  prefix="$acl_save_prefix"
-
-              case "$x" in
-                -L*)
-                  dir=`echo "X$x" | sed -e 's/^X-L//'`
-                  if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext"; then
-                    found_dir="$dir"
-                    found_so="$dir/lib$name.$shlibext"
-                    if test -f "$dir/lib$name.la"; then
-                      found_la="$dir/lib$name.la"
-                    fi
-                  else
-                    if test -f "$dir/lib$name.$libext"; then
-                      found_dir="$dir"
-                      found_a="$dir/lib$name.$libext"
-                      if test -f "$dir/lib$name.la"; then
-                        found_la="$dir/lib$name.la"
-                      fi
-                    fi
-                  fi
-                  ;;
-              esac
-              if test "X$found_dir" != "X"; then
-                break
-              fi
-            done
-          fi
-          if test "X$found_dir" != "X"; then
-                        LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$found_dir -l$name"
-            if test "X$found_so" != "X"; then
-                                                        if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/lib"; then
-                                LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
-              else
-                                                                                haveit=
-                for x in $ltrpathdirs; do
-                  if test "X$x" = "X$found_dir"; then
-                    haveit=yes
-                    break
-                  fi
-                done
-                if test -z "$haveit"; then
-                  ltrpathdirs="$ltrpathdirs $found_dir"
-                fi
-                                if test "$hardcode_direct" = yes; then
-                                                      LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
-                else
-                  if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then
-                                                            LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
-                                                            haveit=
-                    for x in $rpathdirs; do
-                      if test "X$x" = "X$found_dir"; then
-                        haveit=yes
-                        break
-                      fi
-                    done
-                    if test -z "$haveit"; then
-                      rpathdirs="$rpathdirs $found_dir"
-                    fi
-                  else
-                                                                                haveit=
-                    for x in $LDFLAGS $LIBICONV; do
-
-  acl_save_prefix="$prefix"
-  prefix="$acl_final_prefix"
-  acl_save_exec_prefix="$exec_prefix"
-  exec_prefix="$acl_final_exec_prefix"
-  eval x=\"$x\"
-  exec_prefix="$acl_save_exec_prefix"
-  prefix="$acl_save_prefix"
-
-                      if test "X$x" = "X-L$found_dir"; then
-                        haveit=yes
-                        break
-                      fi
-                    done
-                    if test -z "$haveit"; then
-                      LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir"
-                    fi
-                    if test "$hardcode_minus_L" != no; then
-                                                                                        LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
-                    else
-                                                                                                                                                                                LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name"
-                    fi
-                  fi
-                fi
-              fi
-            else
-              if test "X$found_a" != "X"; then
-                                LIBICONV="${LIBICONV}${LIBICONV:+ }$found_a"
-              else
-                                                LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir -l$name"
-              fi
-            fi
-                        additional_includedir=
-            case "$found_dir" in
-              */lib | */lib/)
-                basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e 's,/lib/*$,,'`
-                additional_includedir="$basedir/include"
-                ;;
-            esac
-            if test "X$additional_includedir" != "X"; then
-                                                                                                                if test "X$additional_includedir" != "X/usr/include"; then
-                haveit=
-                if test "X$additional_includedir" = "X/usr/local/include"; then
-                  if test -n "$GCC"; then
-                    case $host_os in
-                      linux*) haveit=yes;;
-                    esac
-                  fi
-                fi
-                if test -z "$haveit"; then
-                  for x in $CPPFLAGS $INCICONV; do
-
-  acl_save_prefix="$prefix"
-  prefix="$acl_final_prefix"
-  acl_save_exec_prefix="$exec_prefix"
-  exec_prefix="$acl_final_exec_prefix"
-  eval x=\"$x\"
-  exec_prefix="$acl_save_exec_prefix"
-  prefix="$acl_save_prefix"
-
-                    if test "X$x" = "X-I$additional_includedir"; then
-                      haveit=yes
-                      break
-                    fi
-                  done
-                  if test -z "$haveit"; then
-                    if test -d "$additional_includedir"; then
-                                            INCICONV="${INCICONV}${INCICONV:+ }-I$additional_includedir"
-                    fi
-                  fi
-                fi
-              fi
-            fi
-                        if test -n "$found_la"; then
-                                                        save_libdir="$libdir"
-              case "$found_la" in
-                */* | *\\*) . "$found_la" ;;
-                *) . "./$found_la" ;;
-              esac
-              libdir="$save_libdir"
-                            for dep in $dependency_libs; do
-                case "$dep" in
-                  -L*)
-                    additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
-                                                                                                                                                                if test "X$additional_libdir" != "X/usr/lib"; then
-                      haveit=
-                      if test "X$additional_libdir" = "X/usr/local/lib"; then
-                        if test -n "$GCC"; then
-                          case $host_os in
-                            linux*) haveit=yes;;
-                          esac
-                        fi
-                      fi
-                      if test -z "$haveit"; then
-                        haveit=
-                        for x in $LDFLAGS $LIBICONV; do
-
-  acl_save_prefix="$prefix"
-  prefix="$acl_final_prefix"
-  acl_save_exec_prefix="$exec_prefix"
-  exec_prefix="$acl_final_exec_prefix"
-  eval x=\"$x\"
-  exec_prefix="$acl_save_exec_prefix"
-  prefix="$acl_save_prefix"
-
-                          if test "X$x" = "X-L$additional_libdir"; then
-                            haveit=yes
-                            break
-                          fi
-                        done
-                        if test -z "$haveit"; then
-                          if test -d "$additional_libdir"; then
-                                                        LIBICONV="${LIBICONV}${LIBICONV:+ }-L$additional_libdir"
-                          fi
-                        fi
-                        haveit=
-                        for x in $LDFLAGS $LTLIBICONV; do
-
-  acl_save_prefix="$prefix"
-  prefix="$acl_final_prefix"
-  acl_save_exec_prefix="$exec_prefix"
-  exec_prefix="$acl_final_exec_prefix"
-  eval x=\"$x\"
-  exec_prefix="$acl_save_exec_prefix"
-  prefix="$acl_save_prefix"
-
-                          if test "X$x" = "X-L$additional_libdir"; then
-                            haveit=yes
-                            break
-                          fi
-                        done
-                        if test -z "$haveit"; then
-                          if test -d "$additional_libdir"; then
-                                                        LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$additional_libdir"
-                          fi
-                        fi
-                      fi
-                    fi
-                    ;;
-                  -R*)
-                    dir=`echo "X$dep" | sed -e 's/^X-R//'`
-                    if test "$enable_rpath" != no; then
-                                                                  haveit=
-                      for x in $rpathdirs; do
-                        if test "X$x" = "X$dir"; then
-                          haveit=yes
-                          break
-                        fi
-                      done
-                      if test -z "$haveit"; then
-                        rpathdirs="$rpathdirs $dir"
-                      fi
-                                                                  haveit=
-                      for x in $ltrpathdirs; do
-                        if test "X$x" = "X$dir"; then
-                          haveit=yes
-                          break
-                        fi
-                      done
-                      if test -z "$haveit"; then
-                        ltrpathdirs="$ltrpathdirs $dir"
-                      fi
-                    fi
-                    ;;
-                  -l*)
-                                        names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
-                    ;;
-                  *.la)
-                                                                                names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
-                    ;;
-                  *)
-                                        LIBICONV="${LIBICONV}${LIBICONV:+ }$dep"
-                    LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$dep"
-                    ;;
-                esac
-              done
-            fi
-          else
-                                                            LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name"
-            LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-l$name"
-          fi
-        fi
-      fi
-    done
-  done
-  if test "X$rpathdirs" != "X"; then
-    if test -n "$hardcode_libdir_separator"; then
-                        alldirs=
-      for found_dir in $rpathdirs; do
-        alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir"
-      done
-            acl_save_libdir="$libdir"
-      libdir="$alldirs"
-      eval flag=\"$hardcode_libdir_flag_spec\"
-      libdir="$acl_save_libdir"
-      LIBICONV="${LIBICONV}${LIBICONV:+ }$flag"
-    else
-            for found_dir in $rpathdirs; do
-        acl_save_libdir="$libdir"
-        libdir="$found_dir"
-        eval flag=\"$hardcode_libdir_flag_spec\"
-        libdir="$acl_save_libdir"
-        LIBICONV="${LIBICONV}${LIBICONV:+ }$flag"
-      done
-    fi
-  fi
-  if test "X$ltrpathdirs" != "X"; then
-            for found_dir in $ltrpathdirs; do
-      LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-R$found_dir"
-    done
-  fi
-
-
-
-
   for ac_header in argz.h limits.h locale.h nl_types.h malloc.h stddef.h \
 stdlib.h string.h unistd.h sys/param.h
 do :
@@ -5426,33 +4883,20 @@
 
 
 
+# Check whether --with-libiconv-prefix was given.
+if test "${with_libiconv_prefix+set}" = set; then :
+  withval=$with_libiconv_prefix;
+    for dir in `echo "$withval" | tr : ' '`; do
+      if test -d $dir/include; then LIBICONV_INCLUDE="-I$dir/include"; fi
+      if test -d $dir/lib; then LIBICONV_LIBDIR="-L$dir/lib"; fi
+    done
 
+fi
 
-          am_save_CPPFLAGS="$CPPFLAGS"
 
-  for element in $INCICONV; do
-    haveit=
-    for x in $CPPFLAGS; do
+  BUILD_LIBICONV_LIBDIRS="../libiconv/lib/.libs ../libiconv/lib/_libs"
+  BUILD_LIBICONV_INCLUDE="-I../libiconv/include"
 
-  acl_save_prefix="$prefix"
-  prefix="$acl_final_prefix"
-  acl_save_exec_prefix="$exec_prefix"
-  exec_prefix="$acl_final_exec_prefix"
-  eval x=\"$x\"
-  exec_prefix="$acl_save_exec_prefix"
-  prefix="$acl_save_prefix"
-
-      if test "X$x" = "X$element"; then
-        haveit=yes
-        break
-      fi
-    done
-    if test -z "$haveit"; then
-      CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element"
-    fi
-  done
-
-
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for iconv" >&5
 $as_echo_n "checking for iconv... " >&6; }
 if test "${am_cv_func_iconv+set}" = set; then :
@@ -5461,6 +4905,10 @@
 
     am_cv_func_iconv="no, consider installing GNU libiconv"
     am_cv_lib_iconv=no
+    am_cv_use_build_libiconv=no
+    am_cv_build_libiconv_path=
+
+    # First, try to find iconv in libc.
     cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <stdlib.h>
@@ -5469,8 +4917,8 @@
 main ()
 {
 iconv_t cd = iconv_open("","");
-       iconv(cd,NULL,NULL,NULL,NULL);
-       iconv_close(cd);
+         iconv(cd,NULL,NULL,NULL,NULL);
+         iconv_close(cd);
   ;
   return 0;
 }
@@ -5480,9 +4928,55 @@
 fi
 rm -f core conftest.err conftest.$ac_objext \
     conftest$ac_exeext conftest.$ac_ext
+
+    # If libiconv is part of the build tree, then try using it over
+    # any system libiconv.
+    if test "$am_cv_func_iconv" != yes && test -d ../libiconv; then
+      for lib_dir in $BUILD_LIBICONV_LIBDIRS; do
+        am_save_LIBS="$LIBS"
+        am_save_CPPFLAGS="$CPPFLAGS"
+        LIBS="$LIBS $lib_dir/libiconv.a"
+        CPPFLAGS="$CPPFLAGS $BUILD_LIBICONV_INCLUDE"
+        cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdlib.h>
+#include <iconv.h>
+int
+main ()
+{
+iconv_t cd = iconv_open("","");
+           iconv(cd,NULL,NULL,NULL,NULL);
+           iconv_close(cd);
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  am_cv_use_build_libiconv=yes
+          am_cv_build_libiconv_path=$lib_dir/libiconv.a
+          am_cv_lib_iconv=yes
+          am_cv_func_iconv=yes
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+        LIBS="$am_save_LIBS"
+        CPPFLAGS="$am_save_CPPFLAGS"
+        if test "$am_cv_use_build_libiconv" = "yes"; then
+          break
+        fi
+      done
+    fi
+
+    # If iconv was not in libc, try -liconv.  In this case, arrange to
+    # look in the libiconv prefix, if it was specified by the user.
     if test "$am_cv_func_iconv" != yes; then
+      am_save_CPPFLAGS="$CPPFLAGS"
       am_save_LIBS="$LIBS"
-      LIBS="$LIBS $LIBICONV"
+      if test -n "$LIBICONV_INCLUDE"; then
+        CPPFLAGS="$CPPFLAGS $LIBICONV_INCLUDE"
+        LIBS="$LIBS $LIBICONV_LIBDIR"
+      fi
+      LIBS="$LIBS -liconv"
       cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <stdlib.h>
@@ -5504,30 +4998,34 @@
 rm -f core conftest.err conftest.$ac_objext \
     conftest$ac_exeext conftest.$ac_ext
       LIBS="$am_save_LIBS"
+      CPPFLAGS="$am_save_CPPFLAGS"
     fi
 
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_func_iconv" >&5
 $as_echo "$am_cv_func_iconv" >&6; }
-  if test "$am_cv_func_iconv" = yes; then
 
-$as_echo "#define HAVE_ICONV 1" >>confdefs.h
-
-  fi
+  # Set the various flags based on the cache variables.  We can't rely
+  # on the flags to remain set from the above code, due to caching.
+  LIBICONV=
   if test "$am_cv_lib_iconv" = yes; then
-    { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to link with libiconv" >&5
-$as_echo_n "checking how to link with libiconv... " >&6; }
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIBICONV" >&5
-$as_echo "$LIBICONV" >&6; }
+    LIBICONV="-liconv"
   else
-            CPPFLAGS="$am_save_CPPFLAGS"
-    LIBICONV=
-    LTLIBICONV=
+    LIBICONV_LIBDIR=
+    LIBICONV_INCLUDE=
   fi
+  if test "$am_cv_use_build_libiconv" = yes; then
+    LIBICONV="$am_cv_build_libiconv_path"
+    LIBICONV_LIBDIR=""
+    LIBICONV_INCLUDE="$BUILD_LIBICONV_INCLUDE"
+  fi
+  CPPFLAGS="$CPPFLAGS $LIBICONV_INCLUDE"
+  LIBS="$LIBS $LIBICONV_LIBDIR $LIBICONV"
 
+  if test "$am_cv_func_iconv" = yes; then
 
+$as_echo "#define HAVE_ICONV 1" >>confdefs.h
 
-  if test "$am_cv_func_iconv" = yes; then
     { $as_echo "$as_me:${as_lineno-$LINENO}: checking for iconv declaration" >&5
 $as_echo_n "checking for iconv declaration... " >&6; }
     if test "${am_cv_proto_iconv+set}" = set; then :
@@ -5710,20 +5208,178 @@
   fi
 
 
+      if test "X$prefix" = "XNONE"; then
+    acl_final_prefix="$ac_default_prefix"
+  else
+    acl_final_prefix="$prefix"
+  fi
+  if test "X$exec_prefix" = "XNONE"; then
+    acl_final_exec_prefix='${prefix}'
+  else
+    acl_final_exec_prefix="$exec_prefix"
+  fi
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  eval acl_final_exec_prefix=\"$acl_final_exec_prefix\"
+  prefix="$acl_save_prefix"
 
 
+# Check whether --with-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then :
+  withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+else
+  with_gnu_ld=no
+fi
 
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  echo "#! /bin/sh" >conf$$.sh
+  echo  "exit 0"   >>conf$$.sh
+  chmod +x conf$$.sh
+  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+    PATH_SEPARATOR=';'
+  else
+    PATH_SEPARATOR=:
+  fi
+  rm -f conf$$.sh
+fi
+ac_prog=ld
+if test "$GCC" = yes; then
+  # Check if gcc -print-prog-name=ld gives a path.
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by GCC" >&5
+$as_echo_n "checking for ld used by GCC... " >&6; }
+  case $host in
+  *-*-mingw*)
+    # gcc leaves a trailing carriage return which upsets mingw
+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+  *)
+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+  esac
+  case $ac_prog in
+    # Accept absolute paths.
+    [\\/]* | [A-Za-z]:[\\/]*)
+      re_direlt='/[^/][^/]*/\.\./'
+      # Canonicalize the path of ld
+      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+      done
+      test -z "$LD" && LD="$ac_prog"
+      ;;
+  "")
+    # If it fails, then pretend we aren't using GCC.
+    ac_prog=ld
+    ;;
+  *)
+    # If it is relative, then search for the first ld in PATH.
+    with_gnu_ld=unknown
+    ;;
+  esac
+elif test "$with_gnu_ld" = yes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
+$as_echo_n "checking for GNU ld... " >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
+$as_echo_n "checking for non-GNU ld... " >&6; }
+fi
+if test "${acl_cv_path_LD+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$LD"; then
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+  for ac_dir in $PATH; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+      acl_cv_path_LD="$ac_dir/$ac_prog"
+      # Check to see if the program is GNU ld.  I'd rather use --version,
+      # but apparently some GNU ld's only accept -v.
+      # Break only if it was the GNU/non-GNU ld that we prefer.
+      if "$acl_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
+	test "$with_gnu_ld" != no && break
+      else
+	test "$with_gnu_ld" != yes && break
+      fi
+    fi
+  done
+  IFS="$ac_save_ifs"
+else
+  acl_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
+fi
 
+LD="$acl_cv_path_LD"
+if test -n "$LD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
+$as_echo "$LD" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+test -z "$LD" && as_fn_error "no acceptable ld found in \$PATH" "$LINENO" 5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
+$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
+if test "${acl_cv_prog_gnu_ld+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  # I'd rather use --version here, but apparently some GNU ld's only accept -v.
+if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
+  acl_cv_prog_gnu_ld=yes
+else
+  acl_cv_prog_gnu_ld=no
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_prog_gnu_ld" >&5
+$as_echo "$acl_cv_prog_gnu_ld" >&6; }
+with_gnu_ld=$acl_cv_prog_gnu_ld
 
 
 
+                                                { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shared library run path origin" >&5
+$as_echo_n "checking for shared library run path origin... " >&6; }
+if test "${acl_cv_rpath+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
 
+    CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \
+    ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh
+    . ./conftest.sh
+    rm -f ./conftest.sh
+    acl_cv_rpath=done
 
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_rpath" >&5
+$as_echo "$acl_cv_rpath" >&6; }
+  wl="$acl_cv_wl"
+  libext="$acl_cv_libext"
+  shlibext="$acl_cv_shlibext"
+  hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
+  hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
+  hardcode_direct="$acl_cv_hardcode_direct"
+  hardcode_minus_L="$acl_cv_hardcode_minus_L"
+    # Check whether --enable-rpath was given.
+if test "${enable_rpath+set}" = set; then :
+  enableval=$enable_rpath; :
+else
+  enable_rpath=yes
+fi
 
 
 
 
 
+
+
+
+
+
+
+
+
+
+
+
+
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether NLS is requested" >&5
 $as_echo_n "checking whether NLS is requested... " >&6; }
     # Check whether --enable-nls was given.

Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]