This is the mail archive of the binutils-cvs@sourceware.org mailing list for the binutils project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

[binutils-gdb/binutils-2_28-branch] Fix PR21404 - assertion fail when calculating symbol size


https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;h=e568fc190ac96d6ab427d018613361e03e4bd22b

commit e568fc190ac96d6ab427d018613361e03e4bd22b
Author: Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>
Date:   Mon Apr 24 15:17:14 2017 +0530

    Fix PR21404 - assertion fail when calculating symbol size
    
    Fix a host of problems related to adjustment of
    symbol values and sizes when relaxing for avr.
    
    1. Adjust symbol size first before adjusting symbol
    value. Otherwise, a symbol whose value just got adjusted to the
    relaxed address also ends up getting resized. See pr21404-1.s.
    
    2. Reduce symbol sizes only if their span is below an
    alignment boundary. Otherwise, the size gets decremented once when the
    actual instruction is relaxed and padding bytes are added, and again
    when the padding bytes are deleted (if padding ends up being unnecessary).
    pr21404-2.s addresses that, and this bug is really the root cause of PR21404.
    
    3. Adjust all symbol values before an alignment boundary.
    Previous code did not adjust symbol values if they fell in the
    would-be padded area, resulting in incorrect symbol values in some
    cases (see pr21404-3.s).
    
    4. Increase symbol sizes if alignment directives require so.
    As pr21404-4.s shows
    .global nonzero_sym
    L1:
        jmp  L1
    nonzero_sym:
        nop
        nop
        .p2align 2
    .size nonzero_sym, .-nonzero_sym
    
    The two nops satisfy the 4 byte alignment at assembly time and
    therefore the size of nonzero_sym is 4. Relaxation shortens
    the 4 byte jmp to a 2 byte rjmp, and to satisfy 4 byte alignment
    the code places 2 extra padding bytes after the nops, increasing
    nonzero_sym's size by 2. This wasn't handled before.
    
    If the assembly code does not have any align directives, then the
    boundary is the section size, and symbol values and sizes == boundary
    should also get adjusted. To handle that case, add a did_pad variable
    and use that to determine whether it should use < boundary or <= boundary.
    
    Also get rid of reloc_toaddr, which is now redundant.  toaddr is now not
    adjusted to handle the above case - the newly added
    did_pad variable does the job.
    
    pr21404-{5,6,7,8} are the same testcases written for local symbols, as
    the code handles them slightly differently.
    
    bfd/ChangeLog
    2017-05-01  Senthil Kumar Selvaraj  <senthil_kumar.selvaraj@atmel.com>
    
    	PR ld/21404
    	* elf32-avr.c (avr_should_move_sym): New function.
    	(avr_should_reduce_sym_size): Likewise.
    	(avr_should_increase_sym_size): Likewise.
    	(elf32_avr_relax_delete_bytes): Adjust symbol values
    	and sizes by calling new functions.
    
    ld/ChangeLog
    2017-04-28  Senthil Kumar Selvaraj  <senthil_kumar.selvaraj@atmel.com>
    
    	PR ld/21404
    	* testsuite/ld-avr/pr21404-1.d: New test.
    	* testsuite/ld-avr/pr21404-1.s: New test.
    	* testsuite/ld-avr/pr21404-2.d: New test.
    	* testsuite/ld-avr/pr21404-2.s: New test.
    	* testsuite/ld-avr/pr21404-3.d: New test.
    	* testsuite/ld-avr/pr21404-3.s: New test.
    	* testsuite/ld-avr/pr21404-4.d: New test.
    	* testsuite/ld-avr/pr21404-4.s: New test.
    	* testsuite/ld-avr/pr21404-5.d: New test.
    	* testsuite/ld-avr/pr21404-5.s: New test.
    	* testsuite/ld-avr/pr21404-6.d: New test.
    	* testsuite/ld-avr/pr21404-6.s: New test.
    	* testsuite/ld-avr/pr21404-7.d: New test.
    	* testsuite/ld-avr/pr21404-7.s: New test.
    	* testsuite/ld-avr/pr21404-8.d: New test.
    	* testsuite/ld-avr/pr21404-8.s: New test.

Diff:
---
 bfd/ChangeLog                   |  9 ++++
 bfd/elf32-avr.c                 | 91 +++++++++++++++++++++++++++--------------
 ld/ChangeLog                    | 20 +++++++++
 ld/testsuite/ld-avr/pr21404-1.d | 12 ++++++
 ld/testsuite/ld-avr/pr21404-1.s | 11 +++++
 ld/testsuite/ld-avr/pr21404-2.d | 16 ++++++++
 ld/testsuite/ld-avr/pr21404-2.s | 25 +++++++++++
 ld/testsuite/ld-avr/pr21404-3.d | 10 +++++
 ld/testsuite/ld-avr/pr21404-3.s | 10 +++++
 ld/testsuite/ld-avr/pr21404-4.d | 10 +++++
 ld/testsuite/ld-avr/pr21404-4.s | 10 +++++
 ld/testsuite/ld-avr/pr21404-5.d | 11 +++++
 ld/testsuite/ld-avr/pr21404-5.s |  9 ++++
 ld/testsuite/ld-avr/pr21404-6.d | 16 ++++++++
 ld/testsuite/ld-avr/pr21404-6.s | 19 +++++++++
 ld/testsuite/ld-avr/pr21404-7.d | 10 +++++
 ld/testsuite/ld-avr/pr21404-7.s |  9 ++++
 ld/testsuite/ld-avr/pr21404-8.d | 10 +++++
 ld/testsuite/ld-avr/pr21404-8.s |  9 ++++
 19 files changed, 286 insertions(+), 31 deletions(-)

diff --git a/bfd/ChangeLog b/bfd/ChangeLog
index a51642b..903c645 100644
--- a/bfd/ChangeLog
+++ b/bfd/ChangeLog
@@ -1,3 +1,12 @@
+2017-05-01  Senthil Kumar Selvaraj  <senthil_kumar.selvaraj@atmel.com>
+
+	PR ld/21404
+	* elf32-avr.c (avr_should_move_sym): New function.
+	(avr_should_reduce_sym_size): Likewise.
+	(avr_should_increase_sym_size): Likewise.
+	(elf32_avr_relax_delete_bytes): Adjust symbol values
+	and sizes by calling new functions.
+
 2017-05-01  Palmer Dabbelt  <palmer@dabbelt.com>
 
 	* config.bfd (riscv32-*): Enable rv64.
diff --git a/bfd/elf32-avr.c b/bfd/elf32-avr.c
index 0f6c188..f140aa7 100644
--- a/bfd/elf32-avr.c
+++ b/bfd/elf32-avr.c
@@ -1854,6 +1854,40 @@ elf32_avr_adjust_reloc_if_spans_insn (bfd *abfd,
     }
 }
 
+static bfd_boolean
+avr_should_move_sym (symvalue symval,
+                     bfd_vma start,
+                     bfd_vma end,
+                     bfd_boolean did_pad)
+{
+  bfd_boolean sym_within_boundary =
+          did_pad ? symval < end : symval <= end;
+  return (symval > start && sym_within_boundary);
+}
+
+static bfd_boolean
+avr_should_reduce_sym_size (symvalue symval,
+                            symvalue symend,
+                            bfd_vma start,
+                            bfd_vma end,
+                            bfd_boolean did_pad)
+{
+  bfd_boolean sym_end_within_boundary =
+          did_pad ? symend < end : symend <= end;
+  return (symval <= start && symend > start && sym_end_within_boundary);
+}
+
+static bfd_boolean
+avr_should_increase_sym_size (symvalue symval,
+                              symvalue symend,
+                              bfd_vma start,
+                              bfd_vma end,
+                              bfd_boolean did_pad)
+{
+  return avr_should_move_sym (symval, start, end, did_pad)
+          && symend >= end && did_pad;
+}
+
 /* Delete some bytes from a section while changing the size of an instruction.
    The parameter "addr" denotes the section-relative offset pointing just
    behind the shrinked instruction. "addr+count" point at the first
@@ -1875,13 +1909,14 @@ elf32_avr_relax_delete_bytes (bfd *abfd,
   Elf_Internal_Rela *irel, *irelend;
   Elf_Internal_Sym *isym;
   Elf_Internal_Sym *isymbuf = NULL;
-  bfd_vma toaddr, reloc_toaddr;
+  bfd_vma toaddr;
   struct elf_link_hash_entry **sym_hashes;
   struct elf_link_hash_entry **end_hashes;
   unsigned int symcount;
   struct avr_relax_info *relax_info;
   struct avr_property_record *prop_record = NULL;
   bfd_boolean did_shrink = FALSE;
+  bfd_boolean did_pad = FALSE;
 
   symtab_hdr = &elf_tdata (abfd)->symtab_hdr;
   sec_shndx = _bfd_elf_section_from_bfd_section (abfd, sec);
@@ -1912,17 +1947,6 @@ elf32_avr_relax_delete_bytes (bfd *abfd,
         }
     }
 
-  /* We need to look at all relocs with offsets less than toaddr. prop
-     records handling adjusts toaddr downwards to avoid moving syms at the
-     address of the property record, but all relocs with offsets between addr
-     and the current value of toaddr need to have their offsets adjusted.
-     Assume addr = 0, toaddr = 4 and count = 2. After prop records handling,
-     toaddr becomes 2, but relocs with offsets 2 and 3 still need to be
-     adjusted (to 0 and 1 respectively), as the first 2 bytes are now gone.
-     So record the current value of toaddr here, and use it when adjusting
-     reloc offsets. */
-  reloc_toaddr = toaddr;
-
   irel = elf_section_data (sec)->relocs;
   irelend = irel + sec->reloc_count;
 
@@ -1962,10 +1986,7 @@ elf32_avr_relax_delete_bytes (bfd *abfd,
          to remember we didn't delete anything i.e. don't set did_shrink,
          so that we don't corrupt reloc offsets or symbol values.*/
       memset (contents + toaddr - count, fill, count);
-
-      /* Adjust the TOADDR to avoid moving symbols located at the address
-         of the property record, which has not moved.  */
-      toaddr -= count;
+      did_pad = TRUE;
     }
 
   if (!did_shrink)
@@ -1981,7 +2002,7 @@ elf32_avr_relax_delete_bytes (bfd *abfd,
 
       /* Get the new reloc address.  */
       if ((irel->r_offset > addr
-           && irel->r_offset < reloc_toaddr))
+           && irel->r_offset < toaddr))
         {
           if (debug_relax)
             printf ("Relocation at address 0x%x needs to be moved.\n"
@@ -2059,7 +2080,7 @@ elf32_avr_relax_delete_bytes (bfd *abfd,
                  {
                    /* If there is an alignment boundary, we only need to
                       adjust addends that end up below the boundary. */
-                   bfd_vma shrink_boundary = (reloc_toaddr
+                   bfd_vma shrink_boundary = (toaddr
                                               + sec->output_section->vma
                                               + sec->output_offset);
 
@@ -2102,12 +2123,10 @@ elf32_avr_relax_delete_bytes (bfd *abfd,
 	{
 	  if (isym->st_shndx == sec_shndx)
             {
-	      if (isym->st_value > addr
-                  && isym->st_value <= toaddr)
-                isym->st_value -= count;
-
-              if (isym->st_value <= addr
-                  && isym->st_value + isym->st_size > addr)
+              symvalue symval = isym->st_value;
+              symvalue symend = symval + isym->st_size;
+              if (avr_should_reduce_sym_size (symval, symend,
+                                      addr, toaddr, did_pad))
                 {
                   /* If this assert fires then we have a symbol that ends
                      part way through an instruction.  Does that make
@@ -2115,6 +2134,12 @@ elf32_avr_relax_delete_bytes (bfd *abfd,
                   BFD_ASSERT (isym->st_value + isym->st_size >= addr + count);
                   isym->st_size -= count;
                 }
+              else if (avr_should_increase_sym_size (symval, symend,
+                                      addr, toaddr, did_pad))
+                isym->st_size += count;
+
+              if (avr_should_move_sym (symval, addr, toaddr, did_pad))
+                isym->st_value -= count;
             }
 	}
     }
@@ -2131,20 +2156,24 @@ elf32_avr_relax_delete_bytes (bfd *abfd,
            || sym_hash->root.type == bfd_link_hash_defweak)
           && sym_hash->root.u.def.section == sec)
         {
-          if (sym_hash->root.u.def.value > addr
-              && sym_hash->root.u.def.value <= toaddr)
-            sym_hash->root.u.def.value -= count;
+          symvalue symval = sym_hash->root.u.def.value;
+          symvalue symend = symval + sym_hash->size;
 
-          if (sym_hash->root.u.def.value <= addr
-              && (sym_hash->root.u.def.value + sym_hash->size > addr))
+          if (avr_should_reduce_sym_size (symval, symend,
+                                  addr, toaddr, did_pad))
             {
               /* If this assert fires then we have a symbol that ends
                  part way through an instruction.  Does that make
                  sense?  */
-              BFD_ASSERT (sym_hash->root.u.def.value + sym_hash->size
-                          >= addr + count);
+              BFD_ASSERT (symend >= addr + count);
               sym_hash->size -= count;
             }
+          else if (avr_should_increase_sym_size (symval, symend,
+                                  addr, toaddr, did_pad))
+              sym_hash->size += count;
+
+          if (avr_should_move_sym (symval, addr, toaddr, did_pad))
+            sym_hash->root.u.def.value -= count;
         }
     }
 
diff --git a/ld/ChangeLog b/ld/ChangeLog
index 682ac6c..7d4faad 100644
--- a/ld/ChangeLog
+++ b/ld/ChangeLog
@@ -1,3 +1,23 @@
+2017-04-28  Senthil Kumar Selvaraj  <senthil_kumar.selvaraj@atmel.com>
+
+	PR ld/21404
+	* testsuite/ld-avr/pr21404-1.d: New test.
+	* testsuite/ld-avr/pr21404-1.s: New test.
+	* testsuite/ld-avr/pr21404-2.d: New test.
+	* testsuite/ld-avr/pr21404-2.s: New test.
+	* testsuite/ld-avr/pr21404-3.d: New test.
+	* testsuite/ld-avr/pr21404-3.s: New test.
+	* testsuite/ld-avr/pr21404-4.d: New test.
+	* testsuite/ld-avr/pr21404-4.s: New test.
+	* testsuite/ld-avr/pr21404-5.d: New test.
+	* testsuite/ld-avr/pr21404-5.s: New test.
+	* testsuite/ld-avr/pr21404-6.d: New test.
+	* testsuite/ld-avr/pr21404-6.s: New test.
+	* testsuite/ld-avr/pr21404-7.d: New test.
+	* testsuite/ld-avr/pr21404-7.s: New test.
+	* testsuite/ld-avr/pr21404-8.d: New test.
+	* testsuite/ld-avr/pr21404-8.s: New test.
+
 2017-04-24  H.J. Lu  <hongjiu.lu@intel.com>
 
 	PR ld/20815
diff --git a/ld/testsuite/ld-avr/pr21404-1.d b/ld/testsuite/ld-avr/pr21404-1.d
new file mode 100644
index 0000000..fc7103f
--- /dev/null
+++ b/ld/testsuite/ld-avr/pr21404-1.d
@@ -0,0 +1,12 @@
+#name: AVR symbol size adjustment with non zero symbol value
+#as: -mmcu=avrxmega2 -mlink-relax
+#ld:  -mavrxmega2 --relax
+#source: pr21404-1.s
+#nm: -n -S
+#target: avr-*-*
+
+#...
+00000000 00000004 T main
+#...
+00000002 00000002 T nonzero_sym
+#...
diff --git a/ld/testsuite/ld-avr/pr21404-1.s b/ld/testsuite/ld-avr/pr21404-1.s
new file mode 100644
index 0000000..66ddb7d
--- /dev/null
+++ b/ld/testsuite/ld-avr/pr21404-1.s
@@ -0,0 +1,11 @@
+    .file "pr21404-1.s"
+.section	.text,"ax",@progbits
+.global nonzero_sym
+.global main
+main:
+L1:
+    jmp  L1
+nonzero_sym:
+    nop
+.size main, .-main
+.size nonzero_sym, .-nonzero_sym
diff --git a/ld/testsuite/ld-avr/pr21404-2.d b/ld/testsuite/ld-avr/pr21404-2.d
new file mode 100644
index 0000000..e85735c
--- /dev/null
+++ b/ld/testsuite/ld-avr/pr21404-2.d
@@ -0,0 +1,16 @@
+#name: AVR symbol size adjustment across alignment boundary
+#as: -mmcu=avrxmega2 -mlink-relax
+#ld:  -mavrxmega2 --relax
+#source: pr21404-2.s
+#nm: -n -S
+#target: avr-*-*
+
+#...
+00000000 00000006 T main
+00000000 00000004 T size_after_align
+00000000 00000004 T size_before_align
+#...
+00000002 00000002 T nonzero_sym_after_align
+00000002 00000004 T nonzero_sym_after_end
+00000002 00000002 T nonzero_sym_before_align
+#...
diff --git a/ld/testsuite/ld-avr/pr21404-2.s b/ld/testsuite/ld-avr/pr21404-2.s
new file mode 100644
index 0000000..e1da1ae
--- /dev/null
+++ b/ld/testsuite/ld-avr/pr21404-2.s
@@ -0,0 +1,25 @@
+    .file "pr21404.s"
+.section	.text,"ax",@progbits
+.global size_before_align
+.global size_after_align
+.global main
+.global nonzero_sym_before_align
+.global nonzero_sym_after_align
+.global nonzero_sym_after_end
+main:
+size_before_align:
+size_after_align:
+L1:
+    jmp  L1
+nonzero_sym_before_align:
+nonzero_sym_after_align:
+nonzero_sym_after_end:
+    jmp  L1
+.size size_before_align, .-size_before_align
+.size nonzero_sym_before_align, .-nonzero_sym_before_align
+    .p2align 1
+.size size_after_align, .-size_after_align
+.size nonzero_sym_after_align, .-nonzero_sym_after_align
+.word L1
+.size main, .-main
+.size nonzero_sym_after_end, .-nonzero_sym_after_end
diff --git a/ld/testsuite/ld-avr/pr21404-3.d b/ld/testsuite/ld-avr/pr21404-3.d
new file mode 100644
index 0000000..145b48f
--- /dev/null
+++ b/ld/testsuite/ld-avr/pr21404-3.d
@@ -0,0 +1,10 @@
+#name: AVR symbol value adjustment with non zero symbol value
+#as: -mmcu=avrxmega2 -mlink-relax
+#ld:  -mavrxmega2 --relax
+#source: pr21404-3.s
+#nm: -n -S
+#target: avr-*-*
+
+#...
+00000006 T nonzero_sym
+#...
diff --git a/ld/testsuite/ld-avr/pr21404-3.s b/ld/testsuite/ld-avr/pr21404-3.s
new file mode 100644
index 0000000..d62ecd9
--- /dev/null
+++ b/ld/testsuite/ld-avr/pr21404-3.s
@@ -0,0 +1,10 @@
+    .file "pr21404-3.s"
+.section	.text,"ax",@progbits
+.global nonzero_sym
+L1:
+    jmp  L1
+    jmp  L1
+    jmp L1
+    .p2align 1
+nonzero_sym:
+    jmp L1
diff --git a/ld/testsuite/ld-avr/pr21404-4.d b/ld/testsuite/ld-avr/pr21404-4.d
new file mode 100644
index 0000000..b80dfcf
--- /dev/null
+++ b/ld/testsuite/ld-avr/pr21404-4.d
@@ -0,0 +1,10 @@
+#name: AVR symbol size increase for alignment
+#as: -mmcu=avrxmega2 -mlink-relax
+#ld:  -mavrxmega2 --relax
+#source: pr21404-4.s
+#nm: -n -S
+#target: avr-*-*
+
+#...
+00000002 00000006 T nonzero_sym
+#...
diff --git a/ld/testsuite/ld-avr/pr21404-4.s b/ld/testsuite/ld-avr/pr21404-4.s
new file mode 100644
index 0000000..3e957bb
--- /dev/null
+++ b/ld/testsuite/ld-avr/pr21404-4.s
@@ -0,0 +1,10 @@
+    .file "pr21404-4.s"
+.section	.text,"ax",@progbits
+.global nonzero_sym
+L1:
+    jmp  L1
+nonzero_sym:
+    nop
+    nop
+    .p2align 2
+.size nonzero_sym, .-nonzero_sym
diff --git a/ld/testsuite/ld-avr/pr21404-5.d b/ld/testsuite/ld-avr/pr21404-5.d
new file mode 100644
index 0000000..519c50f
--- /dev/null
+++ b/ld/testsuite/ld-avr/pr21404-5.d
@@ -0,0 +1,11 @@
+#name: AVR local symbol size adjustment with non zero symbol value
+#as: -mmcu=avrxmega2 -mlink-relax
+#ld:  -mavrxmega2 --relax
+#source: pr21404-5.s
+#nm: -n -S
+#target: avr-*-*
+
+#...
+00000000 00000004 t _main
+00000002 00000002 t _nonzero_sym
+#...
diff --git a/ld/testsuite/ld-avr/pr21404-5.s b/ld/testsuite/ld-avr/pr21404-5.s
new file mode 100644
index 0000000..ccf2394
--- /dev/null
+++ b/ld/testsuite/ld-avr/pr21404-5.s
@@ -0,0 +1,9 @@
+    .file "pr21404-1.s"
+.section	.text,"ax",@progbits
+_main:
+L1:
+    jmp  L1
+_nonzero_sym:
+    nop
+.size _main, .-_main
+.size _nonzero_sym, .-_nonzero_sym
diff --git a/ld/testsuite/ld-avr/pr21404-6.d b/ld/testsuite/ld-avr/pr21404-6.d
new file mode 100644
index 0000000..784fc7c
--- /dev/null
+++ b/ld/testsuite/ld-avr/pr21404-6.d
@@ -0,0 +1,16 @@
+#name: AVR local symbol size adjustment across alignment boundary
+#as: -mmcu=avrxmega2 -mlink-relax
+#ld:  -mavrxmega2 --relax
+#source: pr21404-6.s
+#nm: -n -S
+#target: avr-*-*
+
+#...
+00000000 00000006 t main
+00000000 00000004 t size_after_align
+00000000 00000004 t size_before_align
+#...
+00000002 00000002 t nonzero_sym_after_align
+00000002 00000004 t nonzero_sym_after_end
+00000002 00000002 t nonzero_sym_before_align
+#...
diff --git a/ld/testsuite/ld-avr/pr21404-6.s b/ld/testsuite/ld-avr/pr21404-6.s
new file mode 100644
index 0000000..36f2301
--- /dev/null
+++ b/ld/testsuite/ld-avr/pr21404-6.s
@@ -0,0 +1,19 @@
+    .file "pr21404-6.s"
+.section	.text,"ax",@progbits
+main:
+size_before_align:
+size_after_align:
+L1:
+    jmp  L1
+nonzero_sym_before_align:
+nonzero_sym_after_align:
+nonzero_sym_after_end:
+    jmp  L1
+.size size_before_align, .-size_before_align
+.size nonzero_sym_before_align, .-nonzero_sym_before_align
+    .p2align 1
+.size size_after_align, .-size_after_align
+.size nonzero_sym_after_align, .-nonzero_sym_after_align
+.word L1
+.size main, .-main
+.size nonzero_sym_after_end, .-nonzero_sym_after_end
diff --git a/ld/testsuite/ld-avr/pr21404-7.d b/ld/testsuite/ld-avr/pr21404-7.d
new file mode 100644
index 0000000..1360acb
--- /dev/null
+++ b/ld/testsuite/ld-avr/pr21404-7.d
@@ -0,0 +1,10 @@
+#name: AVR local symbol value adjustment with non zero symbol value
+#as: -mmcu=avrxmega2 -mlink-relax
+#ld:  -mavrxmega2 --relax
+#source: pr21404-7.s
+#nm: -n -S
+#target: avr-*-*
+
+#...
+00000006 t nonzero_sym
+#...
diff --git a/ld/testsuite/ld-avr/pr21404-7.s b/ld/testsuite/ld-avr/pr21404-7.s
new file mode 100644
index 0000000..b7e4e35
--- /dev/null
+++ b/ld/testsuite/ld-avr/pr21404-7.s
@@ -0,0 +1,9 @@
+    .file "pr21404-7.s"
+.section	.text,"ax",@progbits
+L1:
+    jmp  L1
+    jmp  L1
+    jmp L1
+    .p2align 1
+nonzero_sym:
+    jmp L1
diff --git a/ld/testsuite/ld-avr/pr21404-8.d b/ld/testsuite/ld-avr/pr21404-8.d
new file mode 100644
index 0000000..d70ba8f
--- /dev/null
+++ b/ld/testsuite/ld-avr/pr21404-8.d
@@ -0,0 +1,10 @@
+#name: AVR local symbol size increase for alignment
+#as: -mmcu=avrxmega2 -mlink-relax
+#ld:  -mavrxmega2 --relax
+#source: pr21404-8.s
+#nm: -n -S
+#target: avr-*-*
+
+#...
+00000002 00000006 t nonzero_sym
+#...
diff --git a/ld/testsuite/ld-avr/pr21404-8.s b/ld/testsuite/ld-avr/pr21404-8.s
new file mode 100644
index 0000000..6b00df5
--- /dev/null
+++ b/ld/testsuite/ld-avr/pr21404-8.s
@@ -0,0 +1,9 @@
+    .file "pr21404-8.s"
+.section	.text,"ax",@progbits
+L1:
+    jmp  L1
+nonzero_sym:
+    nop
+    nop
+    .p2align 2
+.size nonzero_sym, .-nonzero_sym


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]