The linker supports a plethora of command-line options, but in actual
practice few of them are used in any particular context.
For instance, a frequent use of ld
is to link standard Unix
object files on a standard, supported Unix system. On such a system, to
link a file hello.o
:
ld -o output /lib/crt0.o hello.o -lc
This tells ld
to produce a file called output as the
result of linking the file /lib/crt0.o
with hello.o
and
the library libc.a
, which will come from the standard search
directories. (See the discussion of the -l
option below.)
Some of the command-line options to ld
may be specified at any
point in the command line. However, options which refer to files, such
as -l
or -T
, cause the file to be read at the point at
which the option appears in the command line, relative to the object
files and other file options. Repeating non-file options with a
different argument will either have no further effect, or override prior
occurrences (those further to the left on the command line) of that
option. Options which may be meaningfully specified more than once are
noted in the descriptions below.
Non-option arguments are object files or archives which are to be linked together. They may follow, precede, or be mixed in with command-line options, except that an object file argument may not be placed between an option and its argument.
Usually the linker is invoked with at least one object file, but you can
specify other forms of binary input files using -l
, -R
,
and the script command language. If no binary input files at all
are specified, the linker does not produce any output, and issues the
message No input files
.
If the linker cannot recognize the format of an object file, it will
assume that it is a linker script. A script specified in this way
augments the main linker script used for the link (either the default
linker script or the one specified by using -T
). This feature
permits the linker to link against a file which appears to be an object
or an archive, but actually merely defines some symbol values, or uses
INPUT
or GROUP
to load other objects. Note that
specifying a script in this way merely augments the main linker script;
use the -T
option to replace the default linker script entirely.
See Scripts.
For options whose names are a single letter, option arguments must either follow the option letter without intervening whitespace, or be given as separate arguments immediately following the option that requires them.
For options whose names are multiple letters, either one dash or two can
precede the option name; for example, -trace-symbol
and
--trace-symbol
are equivalent. Note--there is one exception to
this rule. Multiple letter options that start with a lower case 'o' can
only be preceeded by two dashes. This is to reduce confusion with the
-o
option. So for example -omagic
sets the output file
name to magic
whereas --omagic
sets the NMAGIC flag on the
output.
Arguments to multiple-letter options must either be separated from the
option name by an equals sign, or be given as separate arguments
immediately following the option that requires them. For example,
--trace-symbol foo
and --trace-symbol=foo
are equivalent.
Unique abbreviations of the names of multiple-letter options are
accepted.
Note--if the linker is being invoked indirectly, via a compiler driver
(e.g. gcc
) then all the linker command line options should be
prefixed by -Wl,
(or whatever is appropriate for the particular
compiler driver) like this:
gcc -Wl,--startgroup foo.o bar.o -Wl,--endgroup
This is important, because otherwise the compiler driver program may silently drop the linker options, resulting in a bad link.
Here is a table of the generic command line switches accepted by the GNU linker:
-a
keyword
archive
, shared
, or
default
. -aarchive
is functionally equivalent to
-Bstatic
, and the other two keywords are functionally equivalent
to -Bdynamic
. This option may be used any number of times.
-A
architecture
--architecture=
architecture
ld
, this option is useful only for the
Intel 960 family of architectures. In that ld
configuration, the
architecture argument identifies the particular architecture in
the 960 family, enabling some safeguards and modifying the
archive-library search path. See ld
and the Intel 960 family, for details.
Future releases of ld
may support similar functionality for
other architecture families.
-b
input-format
--format=
input-format
ld
may be configured to support more than one kind of object
file. If your ld
is configured this way, you can use the
-b
option to specify the binary format for input object files
that follow this option on the command line. Even when ld
is
configured to support alternative object formats, you don't usually need
to specify this, as ld
should be configured to expect as a
default input format the most usual format on each machine.
input-format is a text string, the name of a particular format
supported by the BFD libraries. (You can list the available binary
formats with objdump -i
.)
See BFD.
You may want to use this option if you are linking files with an unusual
binary format. You can also use -b
to switch formats explicitly (when
linking object files of different formats), by including
-b
input-format before each group of object files in a
particular format.
The default format is taken from the environment variable
GNUTARGET
.
See Environment.
You can also define the input format from a script, using the command
TARGET
;
see Format Commands.
-c
MRI-commandfile
--mri-script=
MRI-commandfile
ld
accepts script
files written in an alternate, restricted command language, described in
MRI Compatible Script Files.
Introduce MRI script files with
the option -c
; use the -T
option to run linker
scripts written in the general-purpose ld
scripting language.
If MRI-cmdfile does not exist, ld
looks for it in the directories
specified by any -L
options.
-d
-dc
-dp
-r
). The
script command FORCE_COMMON_ALLOCATION
has the same effect.
See Miscellaneous Commands.
-e
entry
--entry=
entry
0x
for base 16, or a leading
0
for base 8). See Entry Point, for a discussion of defaults
and other ways of specifying the entry point.
-E
--export-dynamic
If you do not use this option, the dynamic symbol table will normally contain only those symbols which are referenced by some dynamic object mentioned in the link.
If you use dlopen
to load a dynamic object which needs to refer
back to the symbols defined by the program, rather than some other
dynamic object, then you will probably need to use this option when
linking the program itself.
You can also use the version script to control what symbols should
be added to the dynamic symbol table if the output format supports it.
See the description of --version-script
in VERSION.
-EB
-EL
-f
--auxiliary
name
If you later link a program against this filter object, then, when you run the program, the dynamic linker will see the DT_AUXILIARY field. If the dynamic linker resolves any symbols from the filter object, it will first check whether there is a definition in the shared object name. If there is one, it will be used instead of the definition in the filter object. The shared object name need not exist. Thus the shared object name may be used to provide an alternative implementation of certain functions, perhaps for debugging or for machine specific performance.
This option may be specified more than once. The DT_AUXILIARY entries
will be created in the order in which they appear on the command line.
-F
name
--filter
name
If you later link a program against this filter object, then, when you run the program, the dynamic linker will see the DT_FILTER field. The dynamic linker will resolve symbols according to the symbol table of the filter object as usual, but it will actually link to the definitions found in the shared object name. Thus the filter object can be used to select a subset of the symbols provided by the object name.
Some older linkers used the -F
option throughout a compilation
toolchain for specifying object-file format for both input and output
object files.
The GNU linker uses other mechanisms for this purpose: the
-b
, --format
, --oformat
options, the
TARGET
command in linker scripts, and the GNUTARGET
environment variable.
The GNU linker will ignore the -F
option when not
creating an ELF shared object.
-fini
name
_fini
as
the function to call.
-g
-G
value
--gpsize=
value
-h
name
-soname=
name
-i
-r
).
-init
name
_init
as the
function to call.
-l
archive
--library=
archive
ld
will search its
path-list for occurrences of lib
archive.a
for every
archive specified.
On systems which support shared libraries, ld
may also search for
libraries with extensions other than .a
. Specifically, on ELF
and SunOS systems, ld
will search a directory for a library with
an extension of .so
before searching for one with an extension of
.a
. By convention, a .so
extension indicates a shared
library.
The linker will search an archive only once, at the location where it is specified on the command line. If the archive defines a symbol which was undefined in some object which appeared before the archive on the command line, the linker will include the appropriate file(s) from the archive. However, an undefined symbol in an object appearing later on the command line will not cause the linker to search the archive again.
See the -(
option for a way to force the linker to search
archives multiple times.
You may list the same archive multiple times on the command line.
This type of archive searching is standard for Unix linkers. However,
if you are using ld
on AIX, note that it is different from the
behaviour of the AIX linker.
-L
searchdir
--library-path=
searchdir
ld
will search
for archive libraries and ld
control scripts. You may use this
option any number of times. The directories are searched in the order
in which they are specified on the command line. Directories specified
on the command line are searched before the default directories. All
-L
options apply to all -l
options, regardless of the
order in which the options appear.
If searchdir begins with =
, then the =
will be replaced
by the sysroot prefix, a path specified when the linker is configured.
The default set of paths searched (without being specified with
-L
) depends on which emulation mode ld
is using, and in
some cases also on how it was configured. See Environment.
The paths can also be specified in a link script with the
SEARCH_DIR
command. Directories specified this way are searched
at the point in which the linker script appears in the command line.
-m
emulation
--verbose
or -V
options.
If the -m
option is not used, the emulation is taken from the
LDEMULATION
environment variable, if that is defined.
Otherwise, the default emulation depends upon how the linker was
configured.
-M
--print-map
-n
--nmagic
NMAGIC
if possible.
-N
--omagic
OMAGIC
. Note: Although a writable text section
is allowed for PE-COFF targets, it does not conform to the format
specification published by Microsoft.
--no-omagic
-N
option. It
sets the text section to be read-only, and forces the data segment to
be page-aligned. Note - this option does not enable linking against
shared libraries. Use -Bdynamic
for this.
-o
output
--output=
output
ld
; if this
option is not specified, the name a.out
is used by default. The
script command OUTPUT
can also specify the output file name.
-O
level
ld
optimizes
the output. This might take significantly longer and therefore probably
should only be enabled for the final binary.
-q
--emit-relocs
This option is currently only supported on ELF platforms.
-r
--relocatable
ld
. This is often called partial
linking. As a side effect, in environments that support standard Unix
magic numbers, this option also sets the output file's magic number to
OMAGIC
.
If this option is not specified, an absolute file is produced. When
linking C++ programs, this option will not resolve references to
constructors; to do that, use -Ur
.
When an input file does not have the same format as the output file,
partial linking is only supported if that input file does not contain any
relocations. Different output formats can have further restrictions; for
example some a.out
-based formats do not support partial linking
with input files in other formats at all.
This option does the same thing as -i
.
-R
filename
--just-symbols=
filename
For compatibility with other ELF linkers, if the -R
option is
followed by a directory name, rather than a file name, it is treated as
the -rpath
option.
-s
--strip-all
-S
--strip-debug
-t
--trace
ld
processes them.
-T
scriptfile
--script=
scriptfile
ld
's default linker script (rather than adding to it), so
commandfile must specify everything necessary to describe the
output file. See Scripts. If scriptfile does not exist in
the current directory, ld
looks for it in the directories
specified by any preceding -L
options. Multiple -T
options accumulate.
-u
symbol
--undefined=
symbol
-u
may be repeated with
different option arguments to enter additional undefined symbols. This
option is equivalent to the EXTERN
linker script command.
-Ur
-r
: it generates relocatable output--i.e., an output file that can in
turn serve as input to ld
. When linking C++ programs, -Ur
does resolve references to constructors, unlike -r
.
It does not work to use -Ur
on files that were themselves linked
with -Ur
; once the constructor table has been built, it cannot
be added to. Use -Ur
only for the last partial link, and
-r
for the others.
--unique[=
SECTION]
-v
--version
-V
ld
. The -V
option also
lists the supported emulations.
-x
--discard-all
-X
--discard-locals
L
.
-y
symbol
--trace-symbol=
symbol
This option is useful when you have an undefined symbol in your link but
don't know where the reference is coming from.
-Y
path
-z
keyword
combreloc
defs
initfirst
interpose
loadfltr
muldefs
nocombreloc
nocopyreloc
nodefaultlib
nodelete
nodlopen
dlopen
.
nodump
dldump
.
now
origin
Other keywords are ignored for Solaris compatibility.
-(
archives -)
--start-group
archives --end-group
-l
options.
The specified archives are searched repeatedly until no new undefined references are created. Normally, an archive is searched only once in the order that it is specified on the command line. If a symbol in that archive is needed to resolve an undefined symbol referred to by an object in an archive that appears later on the command line, the linker would not be able to resolve that reference. By grouping the archives, they all be searched repeatedly until all possible references are resolved.
Using this option has a significant performance cost. It is best to use
it only when there are unavoidable circular references between two or
more archives.
--accept-unknown-input-arch
--no-accept-unknown-input-arch
--accept-unknown-input-arch
option has been added to
restore the old behaviour.
--as-needed
--no-as-needed
--as-needed
option. Normally,
the linker will add a DT_NEEDED tag for each dynamic library mentioned
on the command line, regardless of whether the library is actually
needed. --as-needed
causes DT_NEEDED tags to only be emitted
for libraries that satisfy some reference from regular objects.
--no-as-needed
restores the default behaviour.
-assert
keyword
-Bdynamic
-dy
-call_shared
-l
options which follow it.
-Bgroup
DF_1_GROUP
flag in the DT_FLAGS_1
entry in the dynamic
section. This causes the runtime linker to handle lookups in this
object and its dependencies to be performed only inside the group.
--unresolved-symbols=report-all
is implied. This option is
only meaningful on ELF platforms which support shared libraries.
-Bstatic
-dn
-non_shared
-static
-l
options which follow it. This
option also implies --unresolved-symbols=report-all
.
-Bsymbolic
--check-sections
--no-check-sections
--check-sections
.
--cref
The format of the table is intentionally simple, so that it may be
easily processed by a script if necessary. The symbols are printed out,
sorted by name. For each symbol, a list of file names is given. If the
symbol is defined, the first file listed is the location of the
definition. The remaining files contain references to the symbol.
--no-define-common
INHIBIT_COMMON_ALLOCATION
has the same effect.
See Miscellaneous Commands.
The --no-define-common
option allows decoupling
the decision to assign addresses to Common symbols from the choice
of the output file type; otherwise a non-Relocatable output type
forces assigning addresses to Common symbols.
Using --no-define-common
allows Common symbols that are referenced
from a shared library to be assigned addresses only in the main program.
This eliminates the unused duplicate space in the shared library,
and also prevents any possible confusion over resolving to the wrong
duplicate when there are many dynamic modules with specialized search
paths for runtime symbol resolution.
--defsym
symbol=
expression
+
and -
to add or subtract hexadecimal
constants or symbols. If you need more elaborate expressions, consider
using the linker command language from a script (see Assignment: Symbol Definitions). Note: there should be no white
space between symbol, the equals sign ("<=>"), and
expression.
--demangle[=
style]
--no-demangle
COLLECT_NO_DEMANGLE
is set. These options may be used to override the default.
--dynamic-linker
file
--embedded-relocs
--fatal-warnings
--force-exe-suffix
If a successfully built fully linked output file does not have a
.exe
or .dll
suffix, this option forces the linker to copy
the output file to one of the same name with a .exe
suffix. This
option is useful when using unmodified Unix makefiles on a Microsoft
Windows host, since some versions of Windows won't run an image unless
it ends in a .exe
suffix.
--no-gc-sections
--gc-sections
-r
, nor should it be used with dynamic linking. The default
behaviour (of not performing this garbage collection) can be restored by
specifying --no-gc-sections
on the command line.
--help
--target-help
-Map
mapfile
-M
option, above.
--no-keep-memory
ld
normally optimizes for speed over memory usage by caching the
symbol tables of input files in memory. This option tells ld
to
instead optimize for memory usage, by rereading the symbol tables as
necessary. This may be required if ld
runs out of memory space
while linking a large executable.
--no-undefined
-z defs
--[no-]allow-shlib-undefined
controls the
behaviour for reporting unresolved references found in shared
libraries being linked in.
--allow-multiple-definition
-z muldefs
--allow-shlib-undefined
--no-allow-shlib-undefined
--no-undefined
except that it
determines the behaviour when the undefined symbols are in a
shared library rather than a regular object file. It does not affect
how undefined symbols in regular object files are handled.
The reason that --allow-shlib-undefined
is the default is that
the shared library being specified at link time may not be the same as
the one that is available at load time, so the symbols might actually be
resolvable at load time. Plus there are some systems, (eg BeOS) where
undefined symbols in shared libraries is normal. (The kernel patches
them at load time to select which function is most appropriate
for the current architecture. This is used for example to dynamically
select an appropriate memset function). Apparently it is also normal
for HPPA shared libraries to have undefined symbols.
--no-undefined-version
--no-warn-mismatch
ld
will give an error if you try to link together input
files that are mismatched for some reason, perhaps because they have
been compiled for different processors or for different endiannesses.
This option tells ld
that it should silently permit such possible
errors. This option should only be used with care, in cases when you
have taken some special action that ensures that the linker errors are
inappropriate.
--no-whole-archive
--whole-archive
option for subsequent
archive files.
--noinhibit-exec
-nostdlib
--oformat
output-format
ld
may be configured to support more than one kind of object
file. If your ld
is configured this way, you can use the
--oformat
option to specify the binary format for the output
object file. Even when ld
is configured to support alternative
object formats, you don't usually need to specify this, as ld
should be configured to produce as a default output format the most
usual format on each machine. output-format is a text string, the
name of a particular format supported by the BFD libraries. (You can
list the available binary formats with objdump -i
.) The script
command OUTPUT_FORMAT
can also specify the output format, but
this option overrides it. See BFD.
-pie
--pic-executable
-qmagic
-Qy
--relax
ld
and the H8/300.
See ld
and the Intel 960 family.
See ld
and Xtensa Processors.
On some platforms, the --relax
option performs global
optimizations that become possible when the linker resolves addressing
in the program, such as relaxing address modes and synthesizing new
instructions in the output object file.
On some platforms these link time global optimizations may make symbolic debugging of the resulting executable impossible. This is known to be the case for the Matsushita MN10200 and MN10300 family of processors.
On platforms where this is not supported, --relax
is accepted,
but ignored.
--retain-symbols-file
filename
--retain-symbols-file
does not discard undefined symbols,
or symbols needed for relocations.
You may only specify --retain-symbols-file
once in the command
line. It overrides -s
and -S
.
-rpath
dir
-rpath
arguments are concatenated and passed to the runtime linker, which uses
them to locate shared objects at runtime. The -rpath
option is
also used when locating shared objects which are needed by shared
objects explicitly included in the link; see the description of the
-rpath-link
option. If -rpath
is not used when linking an
ELF executable, the contents of the environment variable
LD_RUN_PATH
will be used if it is defined.
The -rpath
option may also be used on SunOS. By default, on
SunOS, the linker will form a runtime search patch out of all the
-L
options it is given. If a -rpath
option is used, the
runtime search path will be formed exclusively using the -rpath
options, ignoring the -L
options. This can be useful when using
gcc, which adds many -L
options which may be on NFS mounted
filesystems.
For compatibility with other ELF linkers, if the -R
option is
followed by a directory name, rather than a file name, it is treated as
the -rpath
option.
-rpath-link
DIR
ld -shared
link includes a shared library as one
of the input files.
When the linker encounters such a dependency when doing a non-shared,
non-relocatable link, it will automatically try to locate the required
shared library and include it in the link, if it is not included
explicitly. In such a case, the -rpath-link
option
specifies the first set of directories to search. The
-rpath-link
option may specify a sequence of directory names
either by specifying a list of names separated by colons, or by
appearing multiple times.
This option should be used with caution as it overrides the search path that may have been hard compiled into a shared library. In such a case it is possible to use unintentionally a different search path than the runtime linker would do.
The linker uses the following search paths to locate required shared libraries.
-rpath-link
options.
-rpath
options. The difference
between -rpath
and -rpath-link
is that directories
specified by -rpath
options are included in the executable and
used at runtime, whereas the -rpath-link
option is only effective
at link time. It is for the native linker only.
-rpath
and rpath-link
options
were not used, search the contents of the environment variable
LD_RUN_PATH
. It is for the native linker only.
-rpath
option was not used, search any
directories specified using -L
options.
LD_LIBRARY_PATH
.
DT_RUNPATH
or
DT_RPATH
of a shared library are searched for shared
libraries needed by it. The DT_RPATH
entries are ignored if
DT_RUNPATH
entries exist.
/lib
and /usr/lib
.
/etc/ld.so.conf
exists, the list of directories found in that file.
If the required shared library is not found, the linker will issue a
warning and continue with the link.
-shared
-Bshareable
-e
option is not used and there are
undefined symbols in the link.
--sort-common
ld
to sort the common symbols by size when it
places them in the appropriate output sections. First come all the one
byte symbols, then all the two byte, then all the four byte, and then
everything else. This is to prevent gaps between symbols due to
alignment constraints.
--split-by-file [
size]
--split-by-reloc
but creates a new output section for
each input file when size is reached. size defaults to a
size of 1 if not given.
--split-by-reloc [
count]
--stats
--traditional-format
ld
is different in some ways from
the output of some existing linker. This switch requests ld
to
use the traditional format instead.
For example, on SunOS, ld
combines duplicate entries in the
symbol string table. This can reduce the size of an output file with
full debugging information by over 30 percent. Unfortunately, the SunOS
dbx
program can not read the resulting program (gdb
has no
trouble). The --traditional-format
switch tells ld
to not
combine duplicate entries.
--section-start
sectionname=
org
0x
usually associated with hexadecimal values. Note: there
should be no white space between sectionname, the equals
sign ("<=>"), and org.
-Tbss
org
-Tdata
org
-Ttext
org
.bss
, .data
or
.text
as the sectionname.
--unresolved-symbols=
method
method
:
ignore-all
report-all
ignore-in-object-files
ignore-in-shared-libs
The behaviour for shared libraries on their own can also be controlled
by the --[no-]allow-shlib-undefined
option.
Normally the linker will generate an error message for each reported
unresolved symbol but the option --warn-unresolved-symbols
can change this to a warning.
--dll-verbose
--verbose
ld
and list the linker emulations
supported. Display which input files can and cannot be opened. Display
the linker script being used by the linker.
--version-script=
version-scriptfile
--warn-common
There are three kinds of global symbols, illustrated here by C examples:
int i = 1;
extern int i;
int i;
The --warn-common
option can produce five kinds of warnings.
Each warning consists of a pair of lines: the first describes the symbol
just encountered, and the second describes the previous symbol
encountered with the same name. One or both of the two symbols will be
a common symbol.
file(section): warning: common of `symbol' overridden by definition file(section): warning: defined here
file(section): warning: definition of `symbol' overriding common file(section): warning: common is here
file(section): warning: multiple common of `symbol' file(section): warning: previous common is here
file(section): warning: common of `symbol' overridden by larger common file(section): warning: larger common is here
file(section): warning: common of `symbol' overriding smaller common file(section): warning: smaller common is here
--warn-constructors
--warn-multiple-gp
--warn-once
--warn-section-align
SECTIONS
command does not specify a start address for
the section (see SECTIONS).
--warn-unresolved-symbols
--unresolved-symbols
) it will normally generate an error.
This option makes it generate a warning instead.
--error-unresolved-symbols
--whole-archive
--whole-archive
option, include every object file in the archive
in the link, rather than searching the archive for the required object
files. This is normally used to turn an archive file into a shared
library, forcing every object to be included in the resulting shared
library. This option may be used more than once.
Two notes when using this option from gcc: First, gcc doesn't know
about this option, so you have to use -Wl,-whole-archive
.
Second, don't forget to use -Wl,-no-whole-archive
after your
list of archives, because gcc will add its own list of archives to
your link and you may not want this flag to affect those as well.
--wrap
symbol
__wrap_
symbol
. Any
undefined reference to __real_
symbol
will be resolved to
symbol.
This can be used to provide a wrapper for a system function. The
wrapper function should be called __wrap_
symbol. If it
wishes to call the system function, it should call
__real_
symbol.
Here is a trivial example:
void * __wrap_malloc (size_t c) { printf ("malloc called with %zu\n", c); return __real_malloc (c); }
If you link other code with this file using --wrap malloc
, then
all calls to malloc
will call the function __wrap_malloc
instead. The call to __real_malloc
in __wrap_malloc
will
call the real malloc
function.
You may wish to provide a __real_malloc
function as well, so that
links without the --wrap
option will succeed. If you do this,
you should not put the definition of __real_malloc
in the same
file as __wrap_malloc
; if you do, the assembler may resolve the
call before the linker has a chance to wrap it to malloc
.
--enable-new-dtags
--disable-new-dtags
--enable-new-dtags
, the dynamic tags will be created as needed.
If you specify --disable-new-dtags
, no new dynamic tags will be
created. By default, the new dynamic tags are not created. Note that
those options are only available for ELF systems.
The i386 PE linker supports the -shared
option, which causes
the output to be a dynamically linked library (DLL) instead of a
normal executable. You should name the output *.dll
when you
use this option. In addition, the linker fully supports the standard
*.def
files, which may be specified on the linker command line
like an object file (in fact, it should precede archives it exports
symbols from, to ensure that they get linked in, just like a normal
object file).
In addition to the options common to all targets, the i386 PE linker support additional command line options that are specific to the i386 PE target. Options that take values may be separated from their values by either a space or an equals sign.
--add-stdcall-alias
--base-file
file
dlltool
.
[This is an i386 PE specific option]
--dll
-shared
or specify a LIBRARY
in a given .def
file.
[This option is specific to the i386 PE targeted port of the linker]
--enable-stdcall-fixup
--disable-stdcall-fixup
_foo
might be linked to the function
_foo@12
, or the undefined symbol _bar@16
might be linked
to the function _bar
. When the linker does this, it prints a
warning, since it normally should have failed to link, but sometimes
import libraries generated from third-party dlls may need this feature
to be usable. If you specify --enable-stdcall-fixup
, this
feature is fully enabled and warnings are not printed. If you specify
--disable-stdcall-fixup
, this feature is disabled and such
mismatches are considered to be errors.
[This option is specific to the i386 PE targeted port of the linker]
--export-all-symbols
DllMain@12
,
DllEntryPoint@0
, DllMainCRTStartup@12
, and
impure_ptr
will not be automatically
exported. Also, symbols imported from other DLLs will not be
re-exported, nor will symbols specifying the DLL's internal layout
such as those beginning with _head_
or ending with
_iname
. In addition, no symbols from libgcc
,
libstd++
, libmingw32
, or crtX.o
will be exported.
Symbols whose names begin with __rtti_
or __builtin_
will
not be exported, to help with C++ DLLs. Finally, there is an
extensive list of cygwin-private symbols that are not exported
(obviously, this applies on when building DLLs for cygwin targets).
These cygwin-excludes are: _cygwin_dll_entry@12
,
_cygwin_crt0_common@8
, _cygwin_noncygwin_dll_entry@12
,
_fmode
, _impure_ptr
, cygwin_attach_dll
,
cygwin_premain0
, cygwin_premain1
, cygwin_premain2
,
cygwin_premain3
, and environ
.
[This option is specific to the i386 PE targeted port of the linker]
--exclude-symbols
symbol,
symbol,...
--exclude-libs
lib,
lib,...
--exclude-libs ALL
excludes symbols in all archive libraries from
automatic export. Symbols explicitly listed in a .def file are still exported,
regardless of this option.
[This option is specific to the i386 PE targeted port of the linker]
--file-alignment
--heap
reserve
--heap
reserve,
commit
--image-base
value
--kill-at
--major-image-version
value
--major-os-version
value
--major-subsystem-version
value
--minor-image-version
value
--minor-os-version
value
--minor-subsystem-version
value
--output-def
file
*.def
) may be used to create an import
library with dlltool
or may be used as a reference to
automatically or implicitly exported symbols.
[This option is specific to the i386 PE targeted port of the linker]
--out-implib
file
*.dll.a
or *.a
may be used to link clients against the generated DLL; this behaviour
makes it possible to skip a separate dlltool
import library
creation step.
[This option is specific to the i386 PE targeted port of the linker]
--enable-auto-image-base
--image-base
argument. By using a hash generated
from the dllname to create unique image bases for each DLL, in-memory
collisions and relocations which can delay program execution are
avoided.
[This option is specific to the i386 PE targeted port of the linker]
--disable-auto-image-base
--image-base
) then use the platform
default.
[This option is specific to the i386 PE targeted port of the linker]
--dll-search-prefix
string
<string><basename>.dll
in preference to
lib<basename>.dll
. This behaviour allows easy distinction
between DLLs built for the various "subplatforms": native, cygwin,
uwin, pw, etc. For instance, cygwin DLLs typically use
--dll-search-prefix=cyg
.
[This option is specific to the i386 PE targeted port of the linker]
--enable-auto-import
_symbol
to __imp__symbol
for
DATA imports from DLLs, and create the necessary thunking symbols when
building the import libraries with those DATA exports. Note: Use of the
'auto-import' extension will cause the text section of the image file
to be made writable. This does not conform to the PE-COFF format
specification published by Microsoft.
Using 'auto-import' generally will 'just work' - but sometimes you may see this message:
"variable '<var>' can't be auto-imported. Please read the
documentation for ld's --enable-auto-import
for details."
This message occurs when some (sub)expression accesses an address ultimately given by the sum of two constants (Win32 import tables only allow one). Instances where this may occur include accesses to member fields of struct variables imported from a DLL, as well as using a constant index into an array variable imported from a DLL. Any multiword variable (arrays, structs, long long, etc) may trigger this error condition. However, regardless of the exact data type of the offending exported variable, ld will always detect it, issue the warning, and exit.
There are several ways to address this difficulty, regardless of the data type of the exported variable:
One way is to use -enable-runtime-pseudo-reloc switch. This leaves the task of adjusting references in your client code for runtime environment, so this method works only when runtime environment supports this feature.
A second solution is to force one of the 'constants' to be a variable - that is, unknown and un-optimizable at compile time. For arrays, there are two possibilities: a) make the indexee (the array's address) a variable, or b) make the 'constant' index a variable. Thus:
extern type extern_array[]; extern_array[1] --> { volatile type *t=extern_array; t[1] }
or
extern type extern_array[]; extern_array[1] --> { volatile int t=1; extern_array[t] }
For structs (and most other multiword data types) the only option is to make the struct itself (or the long long, or the ...) variable:
extern struct s extern_struct; extern_struct.field --> { volatile struct s *t=&extern_struct; t->field }
or
extern long long extern_ll; extern_ll --> { volatile long long * local_ll=&extern_ll; *local_ll }
A third method of dealing with this difficulty is to abandon
'auto-import' for the offending symbol and mark it with
__declspec(dllimport)
. However, in practise that
requires using compile-time #defines to indicate whether you are
building a DLL, building client code that will link to the DLL, or
merely building/linking to a static library. In making the choice
between the various methods of resolving the 'direct address with
constant offset' problem, you should consider typical real-world usage:
Original:
--foo.h extern int arr[]; --foo.c #include "foo.h" void main(int argc, char **argv){ printf("%d\n",arr[1]); }
Solution 1:
--foo.h extern int arr[]; --foo.c #include "foo.h" void main(int argc, char **argv){ /* This workaround is for win32 and cygwin; do not "optimize" */ volatile int *parr = arr; printf("%d\n",parr[1]); }
Solution 2:
--foo.h /* Note: auto-export is assumed (no __declspec(dllexport)) */ #if (defined(_WIN32) || defined(__CYGWIN__)) && \ !(defined(FOO_BUILD_DLL) || defined(FOO_STATIC)) #define FOO_IMPORT __declspec(dllimport) #else #define FOO_IMPORT #endif extern FOO_IMPORT int arr[]; --foo.c #include "foo.h" void main(int argc, char **argv){ printf("%d\n",arr[1]); }
A fourth way to avoid this problem is to re-code your
library to use a functional interface rather than a data interface
for the offending variables (e.g. set_foo() and get_foo() accessor
functions).
[This option is specific to the i386 PE targeted port of the linker]
--disable-auto-import
_symbol
to
__imp__symbol
for DATA imports from DLLs.
[This option is specific to the i386 PE targeted port of the linker]
--enable-runtime-pseudo-reloc
--disable-runtime-pseudo-reloc
--enable-extra-pe-debug
--section-alignment
--stack
reserve
--stack
reserve,
commit
--subsystem
which
--subsystem
which:
major
--subsystem
which:
major.
minor
native
, windows
,
console
, and posix
. You may optionally set the
subsystem version also.
[This option is specific to the i386 PE targeted port of the linker]